top of page

LEXAN™ HPX8R Transparent Polycarbonate Resin. Autoclave EtO Healthcare

Autoclave, Healthcare ISO 10993 or USP Class VI. High Flow

LEXAN™ HPX8R Resin is a Autoclave EtO Healthcare Polycarbonate. It is Biocompatible Material for Healthcare Segment & Specific for Repeated Enhanced Autoclave or EtO Sterilization

The Material is Available in Transparent Clear

LEXAN™ HPX8R Resin are High Flow and added Easy Release

The Grade is from the LEXAN™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength

SABIC's Polymer Grade of LEXAN™ HP, EXL Resins offers

Sterilization Diversity - Gamma, E-beam, Autoclave, EtO or Low Hydrogen Temperature Hydrogen Peroxide Gas
Biocompatibility - ISO 10993 or USP Class VI
Food contact Compliance - US FDA, European Union Food Contact and Others
Chemical Resistance - Disinfectants, Cleaners, Lipids or IV Solutions
Material Consistency Healthcare Product Policy - Formulation Lock, Management of Change,

LEXAN™ HPX8R is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ HPX8R Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 120°C

Vicat Softening Temperature of LEXAN™ Polycarbonate HPX8R Resin

Vicat Softening Temperature Rate, B50 = 137

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 35

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 33

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2250

LEXAN™ HPX8R Copolymer Resin has 0.40 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

LEXAN™ HPX8R Polycarbonate Resin are UL94 - HB@ 1.50 mm ~ 3.00 mm

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page