LEXAN™ ML6413 Opaque Color Polycarbonate Resin. Flame Retardant

High Flow Advanced Non-Brominated Non-Chlorinated Flame Retardant

LEXAN™ ML6413 Resin is a Copolymer Flame Retardant Polycarbonate. Non-Brominated Non-Chlorinated Flame Resistance Siloxane Copolymer LEXAN

The Material is Available in Opaque Color

LEXAN™ ML6413 Resin offers High Flow with Improved Light Shielding Capability

The Grade is from Copolymer Formulated of LEXAN™ ML Series. Multi-Purpose Applications, Non-Reinforced

These Series offer Various Characteristics such as Excellent Surface Aesthetics, Excellent Knit Line Strength, and Excellent Processability with Opportunities for Shorter IM Cycle Times

LEXAN™ Applications and Benefits

Eletrical : Passing the Glow Wire Test at 850°C, Excellent Thermal Properties, High Impact Resistance
Lighting : Lightweight, Fast Cycle Times and Snap-fit Assembly. Impact Resistance over a Wide Range of Temperatures. High Heat, UV Stability
Telecomunications : UL94 Rated
Eyewear : Optical Quality, High Refractive Index, Low Specific Gravity
Automotive Lighting : Tough and Durable
Automotive : Weatherability with LEXAN SLX Series
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
Packaging : Excellent Taste and Aroma Protection in the Compliance with FDA and European Food Contact Regulations
Healthcare : Multiple sterilization options

LEXAN™ ML6413 is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ ML6413 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 118°C

Vicat Softening Temperature of LEXAN™ Polycarbonate ML6413 Resin

Vicat Softening Temperature Rate, B50 = 134

Material MFI / Melt Flow Rate

Melt Flow Rate, 260°C/5.0 kgf = 24

Material Melt Volume Rate, MVR

Melt Volume Rate, 260°C/5.0 kg = 20

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2350

LEXAN™ ML6413 Copolymer Resin has 0.40 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

LEXAN™ ML6413 Polycarbonate Resin are UL94 - V0@ 1.70 mm ~ 3.00 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.