BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +60 12 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ ML7689 Opaque Color Polycarbonate Resin. Copolymer FDA Grade
Food Contact Compliant. Low Temperature -40 °C Ductility. Low Flow
LEXAN™ ML7689 Resin is a Copolymer Food Contact Compliant Polycarbonate. Non Reinforced Siloxane Copolymer LEXAN with Low Flow. General Purpose Copolymer for Wide Applications
The Material is Available in Opaque Color. FDA, EU Food Contact Compliant
LEXAN™ ML7689 Resin offers Low Temperature (-40°C) Ductility
The Grade is from Copolymer Formulated of LEXAN™ ML Series. Multi-Purpose Applications, Non-Reinforced
These Series offer Various Characteristics such as Excellent Surface Aesthetics, Excellent Knit Line Strength, and Excellent Processability with Opportunities for Shorter IM Cycle Times
LEXAN™ Applications and Benefits
Eletrical : Passing the Glow Wire Test at 850°C, Excellent Thermal Properties, High Impact Resistance
Lighting : Lightweight, Fast Cycle Times and Snap-fit Assembly. Impact Resistance over a Wide Range of Temperatures. High Heat, UV Stability
Telecomunications : UL94 Rated
Eyewear : Optical Quality, High Refractive Index, Low Specific Gravity
Automotive Lighting : Tough and Durable
Automotive : Weatherability with LEXAN SLX Series
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
Packaging : Excellent Taste and Aroma Protection in the Compliance with FDA and European Food Contact Regulations
Healthcare : Multiple sterilization options
LEXAN™ ML7689 is a Opaque Color ROHS Compliance Polycarbonate Resin
LEXAN™ ML7689 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 124°C
Vicat Softening Temperature of LEXAN™ Polycarbonate ML7689 Resin
Vicat Softening Temperature Rate, B120 = 146
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 6
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 6
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2250
LEXAN™ ML7689 Copolymer Resin has Non Listed Shrinkage, Flow, 3.2 mm. %
LEXAN™ ML7689 Polycarbonate Resin are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.