BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ MPX1 Opaque Copolymer Polycarbonate Resin. Unique High Flow
Easy Release, Low Temperature -30° C Ductility. Added UV Stabilizer
LEXAN™ MPX1 Polycarbonate Resin is an Opaque Polycarbonate Copolymer developed for General-Purpose Engineering applications requiring High Flow Processability, improved Low-Temperature Toughness, and UV Durability. LEXAN™ MPX1 Polycarbonate Resin is designed to deliver a practical balance between Manufacturing Efficiency, Environmental Resistance, and reliable Long-Term performance in Everyday Molded Components.
In Injection Molding Environments Involving Complex Geometries or Thin-Wall Designs, LEXAN™ MPX1 Polycarbonate Resin Exhibits High Flow characteristics that support Smooth Cavity Filling and accurate Replication of Fine Part Details. This allows the unique Polycarbonate Resin to maintain stable Production Conditions while enabling reduced Cycle Times in High-Volume Manufacturing. The formulation of LEXAN™ MPX1 Polycarbonate Resin also includes easy Release Behavior, Improving Demolding Efficiency and reducing Tool Interaction during repeated Processing Cycles.
From a performance Standpoint, LEXAN™ MPX1 Polycarbonate Resin maintains Ductility Down to -30°C, ensuring components Produced with LEXAN™ MPX1 Polycarbonate Resin remain Flexible and resistant to Cracking in Cold Environments. This makes LEXAN™ MPX1 Polycarbonate Resin suitable for applications exposed to Temperature Variation where standard Materials may Lose Impact Toughness.
LEXAN™ MPX1 Polycarbonate Resin also incorporates a UV Stabilizer System, helping protect against Light-Induced degradation such as Discoloration and Loss of Mechanical Properties. This allows LEXAN™ MPX1 Polycarbonate Resin to maintain both appearance and Structural Integrity over time under Indoor Lighting and Moderate Outdoor exposure Conditions.
Mechanically, LEXAN™ MPX1 Polycarbonate Resin provides a balanced combination of Impact Resistance and Dimensional Stability. Components Molded from LEXAN™ MPX1 Polycarbonate Resin retain consistent Geometry, supporting accurate Assembly Fit and Long-Term Functional reliability across a Wide range of applications.
In Terms of Flame Performance, LEXAN™ MPX1 Polycarbonate Resin Achieves UL94 HB Rating at 0.50 mm Thickness, making it suitable for Compact Designs where Basic Flame performance is sufficient without requiring Dedicated Flame-Retardant Systems. LEXAN™ MPX1 Polycarbonate Resin is also RoHS Compliant, supporting Global Environmental and Regulatory Alignment.
Typical applications for LEXAN™ MPX1 Polycarbonate Resin include Consumer Products, Outdoor Housings, Industrial Components, and General-Purpose Molded Parts where High Flow Performance, UV Stability, and Low-Temperature Toughness are critical Design Requirements.
At its Core, LEXAN™ MPX1 Polycarbonate Resin is a High-Flow General-Purpose Engineering material that combines Processing Efficiency, Environmental Durability, and reliable Mechanical Performance, making LEXAN™ MPX1 Polycarbonate Resin a practical Solution for Scalable Manufacturing and Everyday Product applications.
Notes :
LEXAN™ MPX1 Polycarbonate Resin
Opaque Copolymer PC
High Flow Grade
Low Temperature Impact Strength (to ‑30°C)
UV Stabilized
Easy Release Processing
Good Impact Strength & Dimensional Stability
Thin Wall Capability (0.5 mm)
UL94 HB Rated
ROHS Compliant
LEXAN™ MPX1 is a Opaque Color ROHS Compliance Polycarbonate Resin
LEXAN™ MPX1 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 116°C
Vicat Softening Temperature of LEXAN™ Polycarbonate MPX1 Resin
Vicat Softening Temperature Rate, B120 = 139
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 18
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 17
Material Flexural Modulus
Flexural Modulus ASTM D790, 1.3 mm/min, 50 mm Span MPa= 2100
LEXAN™ MPX1 Copolymer Resin has 0.40 ~ 0.80 Shrinkage, Flow, 3.2 mm. %
LEXAN™ MPX1 Polycarbonate Resin are HB@0.50 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.