BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ XHT2146 Opaque Color Polycarbonate Resin. Copolymer High Heat
High Flow Performance, Improved Easy Release. Extreme High Heat 155°C
LEXAN™ XHT2146 Resin is a Copolymer High Heat Polycarbonate. General Purpose Siloxane Copolymer LEXAN with High Flow
The Material is Available in Opaque Color or Limited Transparent Colors
LEXAN™ XHT2146 Resin has High Heat Temperature 155°C with Improved Easy Release
The LEXAN™ XHT Resins – Advanced Performance for Extreme Heat Conditions, these Unique Grades address Customer need for Flame Retardant Polycarbonate based Materials in the Temperature Range of 140°C to 195°C. They offer Exceptional Clarity and Color Stability over a Long Lifespan. The Material Provide Greatly Improved Flow and Impact Compared to other High Heat Polycarbonate.
LEXAN™ XHT Resin Key Performance Features:
- Optical Clarity
- Resistance to Cracks and Haze during Metallization
- 30% greater Flow Length vs. Competitive Materials
- Resistance to Yellowing under UV Aging
- Ease of Processing
- Good Flow for Even Thin Walls
LEXAN™ XHT2146 is a Opaque Color ROHS Compliance Polycarbonate Resin
LEXAN™ XHT2146 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 145°C
Vicat Softening Temperature of LEXAN™ Polycarbonate XHT2146 Resin
Vicat Softening Temperature Rate, B50 = 161
Material MFI / Melt Flow Rate
Melt Flow Rate, 330°C/2.16 kgf = 46
Material Melt Volume Rate, MVR
Melt Volume Rate, 330°C/2.16 kg = 43
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2450
LEXAN™ XHT2146 Copolymer Resin has 0.60 ~ 0.90 Shrinkage, Flow, 3.2 mm. %
LEXAN™ XHT2146 Polycarbonate Resin are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.