BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ULTEM™ 1000B Polyetherimide Film. Unique High Heat PEI Film
Critical High HDT Environment or Application Control or Safety
High Tg from 217°C ULTEM™ 1000B Polyetherimide Film. Only for Demanding Environment.
Made from ULTEM™ 1000B Polyetherimide Resin, High Thermal Stability & Low Moisture Absorption.
Can be Sputtered Copper, Heat Fused Copper or Thermal Lamination
Standard Available Thickness for Advanced Ultem™ 1000B Polyetherimide Film
ULTEM™ 1000B Film 0.025 mm ( Matte / Matte Only )
ULTEM™ 1000B Film 0.038 mm ( Matte / Matte Only )
ULTEM™ 1000B Film 0.050 mm ( Matte / Matte Only )
ULTEM™ 1000B Film 0.075 mm
ULTEM™ 1000B Film 0.100 mm
ULTEM™ 1000B Film 0.125 mm
ULTEM™ 1000B Film 0.175 mm
Physical Surface & Appearance of Ultem™ 1000B Polyetherimide Film
Polish
Matte
Advanced Features & Benefits of Ultem™ 1000B Polyetherimide Film
HDT @ 170 °C
Formable
Low Moisture Absorption
Chemical Resistance
Unique Applications Examples of This LEXAN™ Film
High Temperature Insulation
Insulation Film
High Power Applications
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.