BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ 505R Polycarbonate Resin. Opaque High Viscosity Flame Retardant
Easy Release, 10% Glass Reinforced. Non-Brominated Non-Chlorinated FR
LEXAN™ 505R Resin is a 10% Glass Reinforced Polycarbonate. It is a Non-Brominated Non-Chlorinated Flame Resistance for Engineering Parts that Require Improved Rigidity & Better Heat Resistance
The Material is Available in Opaque Color
LEXAN™ 505R Resin offers High Viscosity with added Easy Release
The Grade is from LEXAN™ 5xx Series with Reinforcement to Improved Strength & Toughness. It's Designed for Toughness with a Flexural Modulus of 3000 MPa or Higher
SABIC's Polymer Grade of LEXAN™ Flame Retardant (FR) Resins are Amorphous Engineering Thermoplastics Characterized by Enhanced Levels of Optical, Mechanical, Electrical and Thermal Properties.
These Grades follow Underwriter Laboratory (UL) Stringent Testing Protocols and offer a Wide Variety of Product Options.
Furthermore, According to ISO 3795, LEXAN™ Resin Compound will Typically Perform in Accordance with the Horizontal Burning Rate Requirements of Federal Motor Vehicle Safety Standard No 302, Flammability of Interior Material or FMVSS 302
LEXAN™ 505R is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 136
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 141
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 7
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 7
Material Flexural Modulus
3400
LEXAN™ 505R Resin are Registered UL94 - V0, 1.10 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.