LEXAN™ 915AU Transparent High Flow Flame Retardant Polycarbonate

Easy Release, Non-Brominated Non-Chlorinated with UV Stabilizer

LEXAN™ 915AU Resin is a Non Reinforced Polycarbonate. It is a Non-Brominated Non-Chlorinated Flame Resistance for Engineering Parts that Require Improved Rigidity & Better Heat Resistance

The Material is Available in Transparent Clear Color

LEXAN™ 915AU Resin offers Low Viscosity with added Easy Release and UV Stabilizer

The Grade is from LEXAN™ 9xx Series with Unique Flame Retardancy. It's Designed for Demanding Applications that requires UL94 V-0 Performance & Added Easy Release for Ease of Processing

SABIC's Polymer Grade of LEXAN™ Flame Retardant (FR) Resins are Amorphous Engineering Thermoplastics Characterized by Enhanced Levels of Optical, Mechanical, Electrical and Thermal Properties.

These Grades follow Underwriter Laboratory (UL) Stringent Testing Protocols and offer a Wide Variety of Product Options.
Furthermore, According to ISO 3795, LEXAN™ Resin Compound will Typically Perform in Accordance with the Horizontal Burning Rate Requirements of Federal Motor Vehicle Safety Standard No 302, Flammability of Interior Material or FMVSS 302

LEXAN™ 915AU is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed, 125

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 140

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 23

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kgf = 21

Material Flexural Modulus

2400

LEXAN™ 915AU Resin are Registered UL94 - V0@3.00mm

LEXAN FR Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.