BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ BPL1000 Polycarbonate. Opaque Low Viscosity Flame Retardant
Improved Flow for Thin Wall Design. Non-Brominated Non-Chlorinated
LEXAN™ BPL1000 Polycarbonate Resin is a Low Viscosity Flame Retardant Engineering Thermoplastic Developed for Applications requiring Excellent Processability, Reliable Fire Safety and a Balanced Combination of Impact Strength and Heat Resistance. This Opaque Polycarbonate Grade Utilizes a Non-Brominated and Non-Chlorinated Flame Retardant System with UV Stabilization, making it suitable for Electrical, Electronic and Industrial Components requiring Thin-Wall Design Capability and Long-Term Performance.
The Low Viscosity Formulation of LEXAN™ BPL1000 provides Improved Flow Characteristics, enabling Efficient Mould Filling for Complex Geometries and Thin-Wall Components. This Enhanced Processability supports High Productivity Manufacturing while maintaining Excellent Surface Quality and Consistent Dimensional Accuracy.
A Key Advantage of LEXAN™ BPL1000 is its Balance of Impact Performance and Heat Resistance. The Material Maintains the Toughness Associated with Polycarbonate Technology while Delivering Reliable Thermal Stability for Applications exposed to Elevated Operating Temperatures.
LEXAN™ BPL1000 Incorporates UV Stabilizer Technology that helps Protect Components against Environmental Aging and Light-Induced Degradation. This added Protection supports Long-Term Appearance Retention and Mechanical Performance in Applications exposed to Indoor Lighting and Outdoor Service Conditions.
The Non-Brominated and Non-Chlorinated Flame Retardant Formulation supports Modern Environmental and Regulatory Requirements while Delivering Reliable Fire Safety Performance. This Non-Halogenated Technology provides Excellent Flame Retardancy without Compromising Processing Efficiency, Mechanical Strength or Product Reliability.
The Material is Particularly suitable for Thin-Wall Electrical and Electronic Components where High Flow Performance, Flame Retardancy and Dimensional Accuracy are Critical Requirements. Its Combination of Processing Efficiency and Balanced Mechanical Properties supports the Production of Compact, Lightweight and Durable Components.
LEXAN™ BPL1000 Polycarbonate Resin also supports Environmental Responsibility through RoHS Compliance. By Restricting Hazardous Substances and Extending Product Service Life, it helps Manufacturers Develop Sustainable Products that Benefit Industries, Communities and Future Generations.
Notes:
LEXAN™ BPL1000 Polycarbonate Resin
Opaque Non-Brominated and Non-Chlorinated
Low Viscosity with Improved Flow for Thin-Wall Designs
Balanced Impact Strength and Heat Performance
UV Stabilized for Enhanced Long-Term Durability
UL94 V-0 Rated from 0.80 mm to 3.00 mm
RoHS Compliant
LEXAN™ BPL1000 is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 96
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 112
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 25.2
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 23
Material Flexural Modulus
2360
LEXAN™ BPL1000 Resin are Registered UL94 - V0@0.80 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.