BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +60 12 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ FL900 Polycarbonate. Opaque Non-Brominated Non-Chlorinated FR
Foamable Polycarbonate with 5% Glass Reinforced. UL94 Rated Grade
LEXAN™ FL900 Resin is a Opaque Color Polycarbonate with 5% Glass Reinforced for Foam Molding.
With Foam Molding, FL900 offers Various Weight Reduction, Impact Strength & Heat Resistance
LEXAN™ FL900 Resin is a Non-Brominated Non-Chlorinated FR Polycarbonate
LEXAN™ Foam Resin Range offers
- Economical Material Solution vs Metal
- Lightweight, Reduce Shipping Cost, Carbon Fuel Emissions
- Low Temperature Processing
- Excellent Release
- Lower Injection Pressure
- Improved Chemical Resistance
- Economical Colored Finish, No Painting
- More Design Freedom vs Metal
- Reduce Sink Marks, Warpage or Flow Issue
- Compatible with Multiple Blowing Agents
- UL94 Rating
LEXAN™ FL900 is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 126
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
N/A
Material Flexural Modulus
2790
LEXAN™ FL900 Resin are Registered UL94 - V-0@6.00mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.