BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ FL910 Polycarbonate. Opaque Non-Brominated Non-Chlorinated FR
Foamable Polycarbonate with 10% Glass Reinforced. UL94 Rated Grade
LEXAN™ FL910 Polycarbonate Resin is a Foamable Flame Retardant Engineering Thermoplastic Developed for Applications requiring Lightweight Construction, Enhanced Structural Strength and Reliable Fire Safety Performance. This Opaque Polycarbonate Grade Combines a Non-Brominated and Non-Chlorinated Flame Retardant System with 10% Glass Reinforcement, Delivering an Excellent Balance of Weight Reduction, Mechanical Durability and Thermal Stability for Demanding Industrial and Electrical Applications.
A Key Advantage of LEXAN™ FL910 is its Foam Moulding Capability, which enables Significant Weight Reduction Compared with Traditional Solid Moulded Components. This Technology helps Manufacturers Reduce Material Usage and Overall Component Weight while maintaining Excellent Structural Integrity and Functional Performance.
The 10% Glass Reinforcement provides Enhanced Strength, Stiffness and Dimensional Stability compared with Lower Glass-Filled Foamable Polycarbonate Grades. This Reinforced Structure supports Applications that Require Superior Load-Bearing Capability and Improved Resistance to Deformation under Mechanical Stress.
LEXAN™ FL910 features a High Viscosity Formulation that delivers Excellent Melt Strength and Stable Foam Processing Performance. These Characteristics Help Produce Uniform Foam Structures, Consistent Part Quality and Reliable Dimensional Accuracy during Manufacturing.
In Addition to its Lightweight Design Benefits, LEXAN™ FL910 offers Excellent Impact Strength and Good Heat Resistance. Components Manufactured from this Material Maintain Mechanical Integrity and Structural Reliability when Exposed to Impact Loads and Elevated Operating Temperatures, Supporting Long-Term Service Performance.
The Non-Brominated and Non-Chlorinated Flame Retardant Technology supports Modern Environmental and Regulatory Requirements while Providing Reliable Fire Protection. This Non-Halogenated Formulation delivers Effective Flame Retardancy without Compromising Mechanical Performance, Processing Efficiency or Material Durability.
LEXAN™ FL910 Polycarbonate Resin also supports Sustainable Product Development through RoHS Compliance. By Reducing Material Consumption through Foam Moulding Technology and Restricting Hazardous Substances, it helps Manufacturers Develop Environmentally Responsible Products that Benefit Industries and Future Generations.
Notes:
LEXAN™ FL910 Polycarbonate Resin
10% Glass-Reinforced
Foamable Flame Retardant Grade
Non-Brominated and Non-Chlorinated Flame Retardant
High Viscosity for Foam Moulding Applications
Lightweight Design with Enhanced Strength and Stiffness
Excellent Impact Strength and Good Heat Resistance
UL94 V-0 Rated from 3.00 mm to 6.00 mm
RoHS Compliant
LEXAN™ FL910 is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 133
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
N/A
Material Flexural Modulus
3510
LEXAN™ FL910 Resin are Registered UL94 - V0@3.00 mm ~ 6.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.