LEXAN™ LUX9230T Resin Superior High Light Transmission Optical Clarity

Impact Resistance, Non-Brominated Non-Chlorinated Flame Retardant

LEXAN™ LUX9230T Resin is Crystal Clear Transparent Polycarbonate for Lighting Industries. Injection Molding Grade

It offers Heat Resistance, High Impact & Excellent Processing.

Added UV Stabilizer & Easy Release

LEXAN™ LUX9230T has Optical Quality with High Light Transmission with Improved Optical Clarity. Produced in SABIC Asia Plant

The LUX9230T is a High-purity Resins that Provide Significantly Improved Light Transmission even after Heat Ageing.

SABIC's Polymer Grade of LEXAN™ Flame Retardant (FR) Resins are Amorphous Engineering Thermoplastics Characterized by Enhanced Levels of Optical, Mechanical, Electrical and Thermal Properties.

These Grades follow Underwriter Laboratory (UL) Stringent Testing Protocols and offer a Wide Variety of Product Options.
Furthermore, According to ISO 3795, LEXAN™ Resin Compound will Typically Perform in Accordance with the Horizontal Burning Rate Requirements of Federal Motor Vehicle Safety Standard No 302, Flammability of Interior Material or FMVSS 302

LEXAN™ LUX9230T is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 126

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 141

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 14

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kgf = 13

Material Flexural Modulus

2300

LEXAN™ LUX9230T Resin are Registered UL94 - V0@1.50 mm ~ 3.00 mm

LEXAN FR Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.