BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ 123R Resin. General Purpose Grade Application High Flow
Added Easy Release and UV Stabilizer. Available in Transparent Clear
LEXAN™ 123R Polycarbonate Resin is a General Ppurpose, High Flow Polycarbonate Grade designed for Versatile applications. LEXAN™ 123R Polycarbonate Resin features Low Viscosity, Easy Mold Release, and an added UV Stabilizer, making it ideal for Durable and High Clarity components. This grade is available in Transparent Clear and delivers excellent Optical and Mechanical Performance.
As part of the LEXAN™ Polycarbonate 100 Series, LEXAN™ 123R Polycarbonate Resin is a Multi Ppurpose, non‑reinforced grade with no added Flame Retardant. The series offers a wide range of Viscosity options .
Typical applications for LEXAN™ 123R Polycarbonate Resin include Automotive Interior and Exterior Parts, Automotive Llighting, Consumer Electronics, and Telecommunications Components. Tough, Durable, and UV‑stabilized, LEXAN™ 123R Polycarbonate Resin meets UL94 HB from 0.75 mm to 3.00 mm, ensuring consistent Reliability across Demanding Environments.
Notes:
LEXAN™ 123R Polycarbonate Resin
Transparent Clear
UV Stabiliser
General Purpose with added Easy Release
ROHS Compliant Grade
LEXAN ™ 123R is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 132
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 143
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 17.5
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 21
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ 123R Resin are UL94 - HB, 0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.