BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ 241S Resin. General Purpose Application Medium Flow Transparent
Super Easy Release with UL94 V2 Rated Polycarbonate Grade
LEXAN™ 241S Polycarbonate Resin fits many General Purpose Builds. It brings a Clean Transparent Clear Look and perform to a Practical Choice for everyday Parts. LEXAN™ 241S Polycarbonate Resin helps keep Projects Simple.
The Advanced Polycarbonate Resin provides medium flow behaviour during Molding, thus supports steady filling in Common Tooling. LEXAN™ 241S Polycarbonate Resin helps reduce surprises during Runs and works well when one require a predictable Output.
LEXAN™ 241S Polycarbonate Resin comes with Super Easy Release. Parts Ejected out Faster after cooling. That can help improve Cycle Time on busy lines, while keeps production moving smoothly.
This Resin is a Flame Retardant Grade with UL94 V2 Rating for Thickness from 0.75 mm to 5.00 mm. It also offers Low Medium Viscosity for Balanced Processing. LEXAN™ 241S Polycarbonate Resin supports Strong Safety Focused Designs.
LEXAN™ 241S Polycarbonate Resin is available in Transparent Clear. It belongs in builds needing Clear looks with Reliable Performance. It also meets ROHS Compliance requirements for Many Markets.
Notes :
LEXAN™ 241S Polycarbonate Resin
Transparent Clear
Added UV Stabiliser & Super Easy Release
UL94 - V2@0.75 mm ~ 5.00 mm
ROHS Compliance
LEXAN™ 241S is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 132
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 154
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 10.5
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 12
Material Flexural Modulus
Flexural Modulus, 1.3 mm/min, 50 mm Span = 2340
LEXAN™ 241S Resin are UL94 - V2, 0.75 mm ~ 5.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.