BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ AT2030R Opaque Color Polycarbonate Resin. High Flow Automotive
Added Easy Release, & UV Stabilizer. Best for Automotive Exterior Part
LEXAN™ AT2030R Polycarbonate Resin is an Opaque Polycarbonate Grade engineered for Automotive Exterior applications requiring Superior Flow Performance, UV Durability, and efficient Processing. Developed to meet the demanding requirements of Modern Vehicle Designs, LEXAN™ AT2030R Polycarbonate Resin combines excellent Moldability with the Durability Needed for Long-Term Outdoor Exposure.
Unlike Higher-Viscosity Automotive Grades, LEXAN™ AT2030R Polycarbonate Resin features a Low-Viscosity, High-Flow Formulation. This allows the material to Fill Complex Mold Geometries more Easily, making LEXAN™ AT2030R Resin particularly Effective for Large Automotive Components, Intricate Trim Designs, and Parts Incorporating Detailed Features. The enhanced Flow characteristics can Help Improve Processing Efficiency while maintaining consistent Part Quality.
A Key performance Advantage of LEXAN™ AT2030R Polycarbonate Resin is its Integrated UV Stabilization Package. Automotive Exterior components are continuously exposed to Sunlight, Weather, and Environmental Conditions. The UV Stabilizer helps reduce Discoloration and Surface Degradation, allowing LEXAN™ AT2030R Resin to retain its appearance and performance throughout Extended Service Life.
To further Improve Manufacturability, LEXAN™ AT2030R Polycarbonate Resin Incorporates easy Release Technology. This Feature Promotes Smoother Demolding, reduces Adhesion to Mold Surfaces, and supports more stable Production Cycles. Manufacturers using LEXAN™ AT2030R Resin can benefit from improved Molding Consistency and enhanced Productivity.
Designed specifically for Exterior Automotive use, LEXAN™ AT2030R Polycarbonate Resin is well suited for Sensor Covers, Trim Components, Exterior Panels, and Styling Elements where Dimensional Accuracy, Surface Appearance, and Environmental Durability are Essential. The High-Flow formulation allows Designers greater flexibility when Developing Parts with Complex Geometries.
In addition to its Processing and Weatherability Benefits, LEXAN™ AT2030R Polycarbonate Resin provides good Impact Resistance, helping finished components withstand Handling, Installation, and Real-World Operating Conditions. This combination of Toughness and Environmental Durability makes the material a practical Choice for demanding Automotive applications.
LEXAN™ AT2030R Polycarbonate Resin is Supplied as a Non-UL Rated Grade, Reflecting its Primary Focus on Automotive Exterior performance rather than Flame-Retardant Requirements.
LEXAN™ AT2030R Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Typical applications for LEXAN™ AT2030R Polycarbonate Resin include Automotive Exterior Panels, Sensor Housings, Trim Components, Protective Exterior Covers, Body-Mounted Accessories, and Weather-Exposed Automotive Assemblies where UV Stability, High Flow, and durable performance are required.
Notes:
LEXAN™ AT2030R Polycarbonate Resin
Opaque Color
High Flow Automotive Grade
Low Viscosity Formulation
Added UV Stabilizer
Added Easy Release
Best for Automotive Exterior Parts
Non-UL Rated Grade
RoHS Compliant
LEXAN™ AT2030R is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 140
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 21
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ AT2030R Resin are Non UL Rated Grade
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.