BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ AVP ZLL12CP Opaque Polycarbonate Resin. Low Flow Opaque
General Purpose Grade for Wide Specification and Good UL94 V2 Rating
LEXAN™ AVP ZLL12CP Polycarbonate Resin is an Opaque Color Polycarbonate Grade designed to deliver reliable Flame Performance, balanced Mechanical Properties, and Broad Specification Flexibility. Developed as a General-Purpose material Platform, LEXAN™ AVP ZLL12CP Polycarbonate Resin is suitable for applications that require Dependable Molding performance while Meeting enhanced Safety Requirements.
Built Around a Targeted 12 MFR Formulation, LEXAN™ AVP ZLL12CP Polycarbonate Resin offers a Low-Flow Processing Profile that supports good Dimensional Control and stable Molding Behavior. This Characteristic makes the material suitable for applications where consistent Part Geometry and Predictable Production performance are Important.
A Key Advantage of LEXAN™ AVP ZLL12CP Resin is its UL94 V-2 Flame Classification, providing improved Flame Resistance compared to standard HB-Rated Polycarbonate Grades. This allows LEXAN™ AVP ZLL12CP Polycarbonate Resin to be considered for applications where both Structural performance and Flame Safety are important Design Considerations.
Unlike Transparent Grades that Emphasize Optical Performance, LEXAN™ AVP ZLL12CP Polycarbonate Resin is Supplied in Opaque Colors, making it suitable for components where appearance Consistency, Light Blocking Capability, or Color Matching requirements are Desired. The Opaque formulation also supports applications where Internal components need to remain Concealed.
LEXAN™ AVP ZLL12CP Polycarbonate Resin retains the Inherent Toughness Associated with Polycarbonate Materials, delivering good Impact Resistance and Long-Term Durability. Parts Molded from LEXAN™ AVP ZLL12CP Resin are Capable of withstanding Handling, Assembly, and Everyday Operating Conditions while maintaining Structural Integrity.
Positioned as a Wide-Specification General-Purpose Grade, LEXAN™ AVP ZLL12CP Polycarbonate Resin provides a practical balance of Processability, Mechanical Performance, and Flame Resistance. This Versatility makes it suitable for use across Multiple Industries and Product Categories.
For Flame Performance, LEXAN™ AVP ZLL12CP Resin Achieves UL94 V-2 Classification from 1.5 mm to 2.3 mm Thickness.
LEXAN™ AVP ZLL12CP Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Typical applications for LEXAN™ AVP ZLL12CP Polycarbonate Resin include Electrical Housings, Appliance Components, Industrial Enclosures, Consumer Products, Equipment Covers, and General-Purpose Molded Parts where Opacity, Impact Strength, and improved Flame performance are required.
Notes:
LEXAN™ AVP ZLL12CP Polycarbonate Resin
Opaque Color
Low Flow General Purpose Grade
Targeted 12 MFR
Good Impact Resistance
Wide Specification Material
UL94 - V2 @ 1.5 mm ~ 2.3 mm
RoHS Compliant
LEXAN™ AVP ZLL12CP is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 12
Material Melt Volume Rate, MVR
N/A
Material Flexural Modulus
N/A
LEXAN™ AVP ZLL12CP Resin are UL94 - V2, 1.5 mm ~ 2.3 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.