BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +60 12 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ GLX143 Transparent Clear Polycarbonate Resin. Optical Quality
Shatter Resistance, Medium Flow. Developed for Automotive Windows
LEXAN™ GLX143 Resin is a High Optical Quality Polycarbonate. Exhibit Low Dust Attraction and Great for Camera Lens
The Material is Available in Transparent Clear
LEXAN™ AT1230R Resin offers Medium Viscosity and added UV Stabilizer
The Grade is from LEXAN™ High Optical Series which offers Transparent Clear, Optical Quality, and High Light Transmission. It's for Lens Applications, Non-Reinforced, and Non Added Flame Retardancy
These Series offer Various Characteristics such as Easy Release, Hydrolytic Stability, UV Stabilizers. Food Contact Compliant and Others
LEXAN™ Applications and Benefits
Range of Viscosity - Wide Selection of Viscosity Rate
- Optical Quality
- Tough and Durable, Impact Resistance
- High Heat Resistance
- Inherent Design Freedom
- Low Specific Gravity, Thinner, Lighter Optical Lenses
- High Refractive Index
LEXAN ™ GLX143 is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 142
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 12
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ GLX143 Resin are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.