BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ HF1110 Resin. General Purpose Application Improved High Flow
Transparent Clear Grade, UL94 Rated with Good Impact Resistance
LEXAN™ HF1110 Polycarbonate Resin is a Transparent Clear Polycarbonate Grade engineered for enhanced Flow Performance, efficient Molding, and reliable Impact Strength. Developed for General-Purpose applications, LEXAN™ HF1110 Polycarbonate Resin helps manufacturers produce Thin-Wall and Complex Molded components with improved Processing Efficiency.
The Primary Advantage of LEXAN™ HF1110 Polycarbonate Resin is its improved High-Flow Formulation. This allows the Resin to Travel more Easily through Mold Cavities, supporting efficient Production of Intricate Parts while maintaining Dimensional Accuracy and Surface Quality. as a Result, LEXAN™ HF1110 Resin is well suited for applications Involving Thin-Wall Geometries and High-Volume Molding.
Despite its High-Flow Characteristics, LEXAN™ HF1110 Polycarbonate Resin retains the Toughness Expected from Engineering-Grade Polycarbonate. Components Molded from LEXAN™ HF1110 Resin Offer good Impact Resistance and Dependable Durability across a Wide range of Operating Conditions.
The Transparent Clear appearance of LEXAN™ HF1110 Polycarbonate Resin provides excellent Optical Clarity, making the material suitable for applications where Visibility, Aesthetics, and performance are Equally Important.
Another benefit of LEXAN™ HF1110 Polycarbonate Resin is its UL94 V-2 Flame Rating, providing enhanced Flame performance compared with standard HB-Rated Grades while maintaining excellent Processability.
For Flame Performance, LEXAN™ HF1110 Resin Achieves UL94 V-2 Classification from 1.10 mm to 6.00 mm Thickness.
LEXAN™ HF1110 Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Notes:
LEXAN™ HF1110 Polycarbonate Resin
Transparent Clear
Improved High Flow Grade
General Purpose application
good Impact Resistance
Suitable for Thin Wall Parts
UL94 - V2 @ 1.10 mm ~ 6.00 mm
RoHS Compliant
LEXAN™ HF1110 is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 126
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
Melt Flow Rate, 300 °C/1.2 kgf = 25
Material Melt Volume Rate, MVR
N/A
Material Flexural Modulus
Flexural Modulus, 1.3 mm/min, 50 mm Span = 2300
LEXAN™ HF1110 Resin are UL94 - V2@1.10 mm ~ 6.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.