BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ HF1130R Resin. General Purpose Application Improved High Flow
UL94 Rated Transparent Clear Grade, Easy Release & Added UV Stabilizer
LEXAN™ HF1130R Polycarbonate Resin delivers exceptional processability and consistent quality for General Purpose applications, combining Improved High Flow characteristics with reliable Mechanical Performance. This Grade emphasizes Melt Flow Rate Performance with a measured Melt Flow Rate at 300°C/1.2 kgf = 25, enabling Faster Cycle Times and Superior Mold Filling for Complex Geometries. LEXAN™ HF1130R Polycarbonate Resin appears frequently in Design Specifications where Low Viscosity and Dimensional Stability are Critical, and the Clear, Transparent Grade offers excellent Optical Clarity while maintaining Toughness.
The Grade is formulated as an improved High Flow Polycarbonate with Very Low Viscosity, easy Release properties, and added UV Stabilizer Durability. LEXAN™ HF1130R Polycarbonate Resin meets ROHS Compliance requirements and is offered as a Non Reinforced, Non added Flame Retardancy option for General Applications. Designers appreciate that LEXAN™ HF1130R Polycarbonate Resin balances Flowability with Impact Resistance, making it suitable for Consumer Goods, Optical Components, and Precision Housings.
Melt Flow Rate Data and Flammability ratings are central to material Selection; LEXAN™ HF1130R Resin Reports UL94 - V2@1.00 mm ~ 6.00 mm, providing Clear Guidance for Safety Assessments and Regulatory Documentation. The Transparent Clear Grade with added UV Stabilizer and easy Release features reduces Post Processing effort while Preserving Surface Finish. Engineers Rely on the material MFI / Melt Flow Rate Specification when Optimizing Injection Molding Parameters and Tooling Design.
LEXAN™ HF1130R Polycarbonate Resin offers Manufacturers practical Advantages such as reduced Cycle Times, Lower Injection Pressures, and Improved Part Consistency. The combination of Low Viscosity and enhanced Flow Enables Thinner Walls and more Intricate features without sacrificing Structural Integrity. Product Teams often Specify LEXAN™ HF1130R Resin Early in Development to ensure that Prototypes and Production Parts Share the Same Processing Window and Performance Expectations.
When Evaluating Polycarbonate Options, prioritize material Data Sheets that Highlight Melt Flow Rate, UL94 Rating, UV Stabilization, and Compliance Status; LEXAN™ HF1130R Polycarbonate Resin repeatedly appears as a preferred choice for applications requiring improved High Flow, Transparent Clarity, and Reliable Outdoor Performance. Incorporating this Grade into Design Reviews and Supplier Specifications helps streamline Qualification, Reduce Time to Market, and Deliver Predictable Part Performance
Notes :
LEXAN™ HF1130R Polycarbonate Resin
Transparent Clear
Added UV Stabiliser & Easy Release
UL94 - V2@1.00 mm ~ 6.00 mm
ROHS Compliance
LEXAN™ HF1130R is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 126
Vicat Softening Temperature Rate
N/A
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 25
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 26
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ HF1130R Resin are UL94 - V2@1.00 mm ~ 6.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.