BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ HF4010SR Opaque Color Polycarbonate Resin. High Flow Thin Wall
Extreme High Flow with added Superior Release and High Gloss Result
Large Parts and Thin-Wall Molded components require Exceptional Processing Performance, and LEXAN™ HF4010SR Polycarbonate Resin is specifically designed to address these Needs. This Opaque Polycarbonate Grade combines Extreme High Flow, Superior Release Performance, and a High-Gloss Surface Finish.
The Advanced Superior Release Technology Incorporated into LEXAN™ HF4010SR Polycarbonate Resin helps Improve Demolding Efficiency and maintain stable Processing even in demanding Production Environments.
A Major Advantage of LEXAN™ HF4010SR Resin is its ability to produce High-Gloss Molded Surfaces, making it suitable for Visible components where Aesthetics are Important. Its High-Flow characteristics further support Molding Large Parts and Thin-Wall Designs with excellent Consistency.
LEXAN™ HF4010SR Polycarbonate Resin is Supplied as a and is also RoHS Compliant.
Notes:
LEXAN™ HF4010SR Polycarbonate Resin
Opaque Color
Extreme High Flow Grade
Advanced Superior Release
High Gloss Surface Finish
Suitable for Large Parts & Thin Walls
RoHS Compliant
LEXAN™ HF4010SR is a Opaque ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 138
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 42
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 40
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ HF4010SR Resin are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.