top of page

LEXAN™ LUX2114 Polycarbonate Resin Translucent White with Diffusion

Medium Flow, Good Thermal Ageing, Medium Diffusion & Easy Release

LEXAN™ LUX2114 Resin is a Lighting Injection Grade Polycarbonate. For Lighting Industries with Medium Diffusion

The Material is Available in Translucent White. Added Improved Rigidity, Heat Resistance and Medium Flow

LEXAN™ LUX2114 Resin offers Good Low Viscosity and UL94 Rated. It has Advanced Diffusion Properties to allow High Light Transmission with High Diffusion thus Less LED are Require
The Result will be More Energy Saving & LEXAN™ LUX2114 has Good Thermal Ageing for Longer Lasting Appearance

The Grade is from LEXAN™ LUX Series with Non-Reinforced, Non Added Flame Retardancy and may offer Good UL94 Rating

These Series offer Various Characteristics such as Easy Release, UV Stabilizers. Range of Diffusion Level and Others

LEXAN™ Applications and Benefits

- Wide Selection of Viscosity Rate
- Excellent Thermal Properties
- Lightweight, Fast Cycle Times
- Flame Retardant Availability
- Optical Quality
- Tough and Durable
- Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
- Direct Metalizing
- High Transmission across the Visible Spectrum

LEXAN ™ LUX2114 is a Translucent White ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 132

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 154

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 17.5

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

Flexural Modulus, 1.3 mm/min, 50 mm Span = 2340

LEXAN™ LUX2114 Resin are V2@0.75 mm ~ 3.00 mm

LEXAN RESIN Opaque Compounded Plastics Resin
SABIC-Distributor for LEXAN Film, Resin and LEXAN Sheet.jpg

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page