BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ LUX2180T Transparent Clear Polycarbonate Resin. High Flow Rate
High Optical Clear with High Transmission and added UV Stabilizer
LEXAN™ LUX2180T Polycarbonate Resin is a Transparent Clear Polycarbonate Grade Specially developed for Optical Injection Molding applications that demand High Flow Processing, Superior Light Transmission, and enhanced UV Durability. combining Optical performance with Manufacturing Efficiency, LEXAN™ LUX2180T Polycarbonate Resin is an excellent material Choice for Precision Optical components where Clarity and appearance are Critical.
The Standout Characteristic of LEXAN™ LUX2180T Polycarbonate Resin is its High-Flow Formulation. This enables the Resin to Fill Intricate Mold Geometries Quickly and Consistently, making LEXAN™ LUX2180T Resin particularly Effective for Complex Optical Parts with Fine Details, Thin Walls, or demanding Surface Quality Requirements. The improved Flow behavior also contributes to efficient Production and reliable Molding Performance.
Optical Quality remains a Primary Strength of LEXAN™ LUX2180T Polycarbonate Resin. The material delivers High Light Transmission, allowing Maximum Brightness and Optical Efficiency in finished Components. Parts Molded from LEXAN™ LUX2180T Resin Exhibit excellent Transparency and Visual Clarity, making the Grade suitable for Lighting, Optical, and Display-Related applications.
To support Long-Term appearance Retention, LEXAN™ LUX2180T Polycarbonate Resin Incorporates an added UV Stabilizer. This Feature helps Minimize Yellowing and performance Loss caused by Prolonged exposure to Ultraviolet Light, allowing Optical components to maintain their Transparency and Visual Quality throughout their Service Life.
beyond its Optical Advantages, LEXAN™ LUX2180T Polycarbonate Resin retains the Impact Resistance and Durability Associated with Polycarbonate Materials. This combination of Toughness and Clarity allows LEXAN™ LUX2180T Resin to perform reliably in applications where Optical Precision and Mechanical Integrity are Equally Important.
For Designers and Manufacturers, LEXAN™ LUX2180T Polycarbonate Resin provides a practical balance of High Flow Processability, Optical Transparency, UV Stability, and Durability, making it an attractive Solution for Advanced Lighting and Optical Systems.
For Flame Performance, LEXAN™ LUX2180T Resin Achieves UL94 V-2 Classification from 0.75 mm to 3.00 mm Thickness.
LEXAN™ LUX2180T Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Typical applications for LEXAN™ LUX2180T Polycarbonate Resin include Optical Lenses, LED Lighting Components, Light Guides, Transparent Covers, Display Systems, and Precision Optical Molded Parts where High Transmission, UV Stability, and excellent Molding performance are required.
Notes:
LEXAN™ LUX2180T Polycarbonate Resin
Transparent Clear
Optical Injection Molding Grade
High Flow Properties
High Light Transmission
Added UV Stabilizer
Good Impact Resistance
UL94 - V2 @ 0.75 mm ~ 3.00 mm
RoHS Compliant
LEXAN™ LUX2180T is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 140
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 18
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ LUX2180T Resin are V2@0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.