top of page

LEXAN™ LUX2289 Resin Opaque Color with High Reflective Surface

Medium Flow, Thermal Ageing with added UV Stabilizers & Easy Release

LEXAN™ LUX2289 Resin is a High Reflective Lighting Polycarbonate. For Lighting Industries with more than 96% Reflectivity

The Material is Available in Opaque

LEXAN™ LUX2289 Resin offers Improved Rigidity, Heat Resistance, Medium Flow, Easy Release & UV Stabilizers

The Grade is from LEXAN™ LUX Series with Non-Reinforced, Non Added Flame Retardancy and may offer Good UL94 Rating

These Series offer Various Characteristics such as Easy Release, UV Stabilizers. Range of Diffusion Level and Others

LEXAN™ Applications and Benefits

- Wide Selection of Viscosity Rate
- Excellent Thermal Properties
- Lightweight, Fast Cycle Times
- Flame Retardant Availability
- Optical Quality
- Tough and Durable
- Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
- Direct Metalizing
- High Transmission across the Visible Spectrum

LEXAN ™ LUX2289 is a Opaque ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 124

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 142

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 17

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kgf = 16

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2500

LEXAN™ LUX2289 Resin are V2@1.5 mm ~ 3.00 mm

LEXAN RESIN Opaque Compounded Plastics Resin
SABIC-Distributor for LEXAN Film, Resin and LEXAN Sheet.jpg

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page