BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ LUX2614 Polycarbonate Resin Translucent White with Diffusion
Unique Color Stability, Improved Thermal Ageing, added UV Stabilizer
LEXAN™ LUX2614 Polycarbonate Resin offers a Clean Translucent White Color and Smooth Light Diffusion. This Lighting Diffusion grade Fits Modern Lighting Designs. It supports Medium Reflectivity for Balanced Output. It helps Create Soft Glare Control in Lenses and Covers.
The Grade offers Unique Color Stability in demanding use. LEXAN™ LUX2614 Polycarbonate Resin includes an added UV Stabilizer for better Outdoor and Indoor Exposure. It delivers improved Thermal Ageing for Longer Service Life. This Grade helps keep appearance Consistent across Production Runs.
LEXAN™ LUX2614 Polycarbonate Resin is available in Translucent White Only. Typical Thickness Performance Covers UL94 V2 @ 0.75 mm ~ 3.00 mm. This range supports many Lighting Parts and Panels. It works well where Stable Diffusion matters most.
The Unique Polycarbonate Resin provides improved Rigidity for Stronger Parts. LEXAN™ LUX2614 Polycarbonate Resin further adds Heat Resistance for Hot Luminaire Zones. It has High Viscosity for controlled Flow and Form, while maintains a Medium Diffusion Level for even Brightness.
LEXAN™ LUX2614 Polycarbonate Resin Belongs to the LEXAN™ LUX Series Family, which offers Non-Reinforced with No Added Flame Retardancy. The Grade is a Translucent White ROHS Compliance Polycarbonate Resin for Suitability Responsible
Notes :
LEXAN™ LUX2614 Polycarbonate Resin
Translucent White
Added UV Stabiliser
UL94 - V2@0.75 mm ~ 3.00 mm
ROHS Compliance
LEXAN™ LUX2614 is a Translucent White ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 132
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 154
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 7
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 7
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ LUX2614 Resin are V2@0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.