BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ LUX2614G Polycarbonate Resin Translucent White with Diffusion
Color Stability, Improved Thermal Ageing, UV Stabilizer, Easy Release
Lighting Systems designed for Outdoor use Face Multiple Challenges, including Prolonged UV Exposure, Elevated Operating Temperatures, and Stringent Safety Requirements. LEXAN™ LUX2614G Polycarbonate Resin Was developed to address these demands through a combination of Light Diffusion Performance, enhanced Flame Retardance, UV Durability, and Long-Term Thermal Stability.
The Translucent White formulation gives LEXAN™ LUX2614G Polycarbonate Resin its Characteristic Diffusion Properties, helping to distribute Light more Evenly across Illuminated Surfaces. This makes LEXAN™ LUX2614G Resin particularly Effective in LED Diffusers, Lighting Covers, and Luminaire applications where uniform Light Output is preferred over Direct Light Transmission.
A Notable benefit of LEXAN™ LUX2614G Polycarbonate Resin is its improved Thermal Ageing Performance. Lighting components are often exposed to Continuous Heat during Operation, and LEXAN™ LUX2614G Resin is engineered to maintain its appearance and Functionality over Extended Service Periods. This helps support Long-Term reliability in both Indoor and Outdoor Lighting Installations.
To further Enhance Environmental Durability, LEXAN™ LUX2614G Polycarbonate Resin Incorporates an added UV Stabilizer. This Feature helps preserve Color and reduce degradation caused by Sunlight Exposure. as a Result, LEXAN™ LUX2614G Resin offers excellent Color Stability and is well suited for Outdoor Lighting Systems where appearance Retention is Important.
Processing Efficiency is supported through Material’s Easy Release Formulation. during Molding Operations, LEXAN™ LUX2614G Polycarbonate Resin Promotes Smoother Demolding and improved Cycle Consistency, helping manufacturers achieve efficient Production while maintaining Part Quality.
Another Distinguishing Feature of LEXAN™ LUX2614G Polycarbonate Resin is its improved Flame Retardance. combined with its High-Viscosity Profile and Diffusion Properties, the material provides a balanced Solution for Lighting applications requiring both performance and Safety.
For Flame Performance, LEXAN™ LUX2614G Resin Achieves UL94 V-2 Classification from 0.75 mm to 3.00 mm Thickness.
LEXAN™ LUX2614G Polycarbonate Resin is also RoHS Compliant, supporting alignment with Global Environmental and Regulatory Requirements.
Typical applications for LEXAN™ LUX2614G Polycarbonate Resin include LED Diffusers, Outdoor Luminaires, Architectural Lighting Systems, Illuminated Signage, Commercial Lighting Fixtures, and Decorative Lighting Covers where Diffusion, UV Resistance, Thermal Durability, and Flame performance are required.
Notes:
LEXAN™ LUX2614G Polycarbonate Resin
Translucent White with Diffusion
Lighting Grade
High Viscosity
Improved Flame Retardance
Improved Thermal Ageing Performance
Excellent Color Stability
Added UV Stabilizer
Added Easy Release
UL94 - V2 @ 0.75 mm ~ 3.00 mm
RoHS Compliant
LEXAN™ LUX2614G is a Translucent White ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 132
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 143
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 7
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 7
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ LUX2614G Resin are V2@0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.