BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ ML3729 Resin. General Purpose Application Super High Flow
Transparent Clear Grade with UL94 V2 Rated & Added UV Stabilizer
LEXAN™ ML3729 Resin is a Extreme High Flow Polycarbonate.
The Material is Available in Transparent Clear
LEXAN™ ML3729 Resin offers Extreme Low Viscosity, added UV Stabilizer and UL94 Rated
The Grade is from LEXAN™ ML Series with Unique Extreme Low Viscosity. For Multi-Purpose Applications, Non-Reinforced, Non Added Flame Retardancy and may offer Good UL94 Rating
These Series offer Various Characteristics such as Easy Release, Hydrolytic Stability, UV Stabilizers. Food Contact Compliant and Others
LEXAN™ Applications and Benefits
Range of Viscosity - Wide Selection of Viscosity Rate
Electrical : Excellent Thermal Properties, Non Flame Retardant
Lighting : Lightweight, Fast Cycle Times
Telecomunications : UL94 Rated
Eyewear : Optical Quality
Automotive Lighting : Tough and Durable
Appliances : Consistent Processability, High-Quality Glass-like Transparency, and Gloss, Inherent Design Freedom
Packaging : FDA and European Food Contact Regulations
LEXAN ™ ML3729 is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 139
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 36
Material Flexural Modulus
Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2300
LEXAN™ ML3729 Resin are V2@0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.