top of page

LEXAN™ OQ2720 Polycarbonate Resin. Transparent High Optical Clear

For Ophthalmic Lenses, High Refractive Index, High Impact Strength

LEXAN™ OQ2720 Resin is a Safety Eyewear Grade Polycarbonate. For Safety Lens, Ophthalmic Lenses & Eyewear Industries

The Material is Available in Transparent Clear

LEXAN™ OQ2720 Resin offers High Viscosity, Optical Quality with High Light Transmission with Added UV Stabilizer

The Grade is from LEXAN™ High Optical Series which offers Transparent Clear, Optical Quality, and High Light Transmission. It's for Lens Applications, Non-Reinforced, and Non Added Flame Retardancy

These Series may offer Various Characteristics such as Easy Release, Hydrolytic Stability, UV Stabilizers. Food Contact Compliant and Others

LEXAN™ Applications and Benefits

Range of Viscosity - Wide Selection of Viscosity Rate
- Optical Quality, High Clarity
- Tough and Durable, Impact Resistance for Safety
- High Heat Resistance
- Inherent Design Freedom
- Low Specific Gravity, Thinner, Lighter Optical Lenses
- High Refractive Index

LEXAN ™ OQ2720 is a Transparent Clear ROHS Compliance Polycarbonate Resin

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 132

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 7.5

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

Flexural Modulus, 1.3 mm/min, 50 mm Span = 2340

LEXAN™ OQ2720 Resin are Non UL94 Rated

LEXAN RESIN Opaque Compounded Plastics Resin
SABIC-Distributor for LEXAN Film, Resin and LEXAN Sheet.jpg

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page