BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
LEXAN™ HP6NR Polycarbonate. Transparent Clear Resin. Autoclave EtO
Healthcare ISO 10993 or USP Class VI. Low Flow, Non Added Release
LEXAN™ HP6NR Resin is a Transparent Clear Healthcare Polycarbonate Material Designed for Medical Applications requiring Sterilization Compatibility, Optical Clarity and Controlled Processing Characteristics. Developed specifically for healthcare environments, LEXAN™ HP6NR features a Low Flow formulation without Added Release Agents, making it an ideal choice for manufacturers seeking a medical-grade polycarbonate with traditional surface properties and excellent moulding consistency.
LEXAN™ HP6NR Polycarbonate Resin is engineered to withstand both Autoclave and Ethylene Oxide (EtO) Sterilization Processes commonly used in hospitals, laboratories and healthcare facilities. Components manufactured from LEXAN™ HP6NR maintain their dimensional stability, transparency and mechanical performance after repeated sterilization cycles, supporting the long-term reliability of reusable healthcare products.
Transparency is a key feature of LEXAN™ HP6NR. The clear polycarbonate formulation provides excellent visual clarity for applications requiring fluid observation, diagnostic visibility and component inspection. This makes LEXAN™ HP6NR Resin suitable for medical housings, laboratory equipment, fluid management components and diagnostic devices where optical performance is essential.
A distinctive advantage of LEXAN™ HP6NR Polycarbonate is its Non-Added Release Formulation. Unlike grades containing mould release additives, LEXAN™ HP6NR is developed for applications where downstream processing, assembly compatibility or surface-specific requirements make a non-release material desirable.
LEXAN™ HP6NR Resin has been Biocompatibility Assessed to ISO 10993 and USP Class VI standards. These recognized healthcare evaluations support the use of LEXAN™ HP6NR in medical and healthcare applications where regulatory compliance, material consistency and patient safety are important considerations.
The Low Flow characteristics of LEXAN™ HP6NR Polycarbonate Resin provide enhanced moulding control, particularly for components requiring precise dimensional accuracy and robust structural performance. Manufacturers can utilize LEXAN™ HP6NR to produce high-quality healthcare components with excellent consistency and reliable mechanical properties.
Combining Optical Clarity, Sterilization Resistance, Biocompatibility Assessment and a Non-Added Release Formulation, LEXAN™ HP6NR is well suited for reusable medical devices, laboratory systems, diagnostic equipment and healthcare components that require dependable long-term performance in demanding medical environments.
Notes:
LEXAN™ HP6NR Polycarbonate Resin
Transparent Clear Healthcare Grade
Compatible with Autoclave Sterilization
Compatible with Ethylene Oxide (EtO) Sterilization
Biocompatibility Assessed to ISO 10993
USP Class VI Assessed
Low Flow Processing Grade
Excellent Optical Clarity
Suitable for Reusable Medical and Healthcare Applications
UL94 HB Rated from 0.70 mm to 3.00 mm
RoHS Compliant
LEXAN™ HP6NR is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 124
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 143
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 7
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kgf = 7
Material Flexural Modulus
2250
LEXAN™ HP6NR Resin are UL94 - HB@0.70 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.