STAT-KON MD000I Compound. Polypropylene Resin Conductive Carbon Powder

ATEX Compliant , Impact Modified Formulation, and Chemical Resistance

LNP™ STAT-KON™ MD000I Compound is a Polypropylene Resin with Carbon Powder Reinforced. Cost Effective Low Density Material with High Impact Strength

The Compound Surface Resistivity = 1.E+02 - 1.E+04 Ω. UL94 Rated

The PP Compound offer Highly Chemical Resistant, Highly Impermeable to Corrosion and Chemical Leaking

STAT-KON™ MD000I Featured such as : -
- Electrically Conductive
- High Flexural Strength from its Semi-Crystalline Nature
- Low Coefficient of Friction
- Resistant to Moisture
- Good Chemical Resistance over a Wide Range of Bases and Acids
- Good Fatigue Resistance
- High Impact Strength
- ATEX Compliant. Compliance with IEC 60079-0:2017 : “Explosive Atmospheres–Part 0: Equipment – General Requirements”
- Temperature Index as determined by IEC 60216-1:2013 “Electrical Insulating Materials – Thermal Endurance
Properties – Part 1: Ageing Procedures and Evaluation”

Applications Examples

- Electronic Components
- Electrical
- Material Handling

LNP™ STAT-KON™ offers Cost Effective Solutions for Parts avoiding Static Electricity Buildup or Discharge

STAT-KON™ MD000I Resin has a Flexural Modulus of 1600 MPa. 2 mm/min ISO 178

STAT-KON™ MD000I Resin offers a Tensile Strain, Break, 5 mm/min of 24%. ISO 527

SABIC LNP™ STAT-KON™ MD000I compound offer HDT, 1.82 MPa of -°C

LNP™ STAT-KON™ MD000I Compound Resin has 1.6 ~ 1.8% Shrinkage, Along Flow

STAT-KON® MD000I Compound are UL94 - HB @ 1.50 mm ~ 1.60 mm

STAT-KON Main Page