NORYL™ 115EM4A Conductive Carbon Powder & Mineral PPE Blend Resin

Dimensional Stability, Good Surface Appearance & Good Impact Strength

NORYL™ 115EM4A Resin is a Polyphenylene Ether based engineering Thermoplastic formulated with Conductive Carbon Powder and Mineral additives to provide Electrically Conductive Performance. This Grade builds upon the EM4 Series by supporting applications that require Charge Dissipation and Shielding Capability alongside stable Mechanical Properties and Consistent Processing Behavior. ther grade offer Better Heat Stabilized and Impact Modified alloy. The "A" suffix often denotes an Advanced or Optimized version for specific Durability requirements.

Electrical Conductivity supports Components exposed to Static Charge Accumulation or Electromagnetic Interference considerations. NORYL™ 115EM4A Resin balanced Impact Strength and Structural Stability allow Molded Parts to withstand Handling and Assembly Stress while maintaining Dimensional Control across Service Conditions.

NORYL™ 115EM4A Resin Low Moisture Sensitivity helps preserve Geometry and Fit over Time, supporting reliable Performance in Environments with varying Humidity Levels. Good Surface Appearance enables Molded Parts to maintain Uniform Visual Quality without Extensive Surface Treatment or Secondary Finishing Operations.

NORYL™ 115EM4A Resin is a ROHS Compliant Material, supporting Integration into Products that must meet International Environmental Directives. ROHS Compliance Helps Facilitate Global Distribution and use without Introducing Additional Material‑Level Regulatory Constraints

Notes :

NORYL™ 115EM4A PPE Resin
Improved Version
Conductive Carbon Powder and Minerals
For Shielding Applications
ROHS Compliant

NORYL 115EM4A PPE has 0.70 ~ 0.80 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 163

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

3340

NORYL™ 115EM4A are Non UL Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.