NORYL™ BN31 Non Halogenated Flame Retardant Resin PPE + HIPS Blend

High Flow, Impact Resistance, Low Warpage & Hydrolytic Stability

NORYL™ BN31 PPE + HIPS Resin is a Non‑Halogenated Flame Retardant engineering Thermoplastic Designed to balance Flame Safety, Mechanical Performance, and Dimensional Stability. This material supports applications that require reliable Flame Retardant behavior without the use of Brominated or Chlorinated additives, while maintaining Good Thermal Resistance and Processing Efficiency.

High Flow Characteristics associated with NORYL™ BN31 PPE + HIPS Resin support efficient Injection Molding and enable the production of Complex or Thin‑Wall Components with Consistent Quality. Impact Resistance, including Low Temperature performance, allows components made from this Resin to withstand Mechanical Stress while maintaining Low Warpage and Dimensional Accuracy.

Hydrolytic Stability contributes to the Long Term reliability of NORYL™ BN31 PPE + HIPS Resin, making it suitable for environments where exposure to moisture or Humidity variation may occur. In addition, Good Surface appearance supports applications where Visual Quality is required, helping reduce the need for Secondary Finishing Operations.

Flame Performance for NORYL™ BN31 PPE + HIPS Resin is confirmed by its UL Classification. NORYL™ BN31 are UL94‑V0 rated, 1.50 mm ~ 3.00 mm , demonstrating Robust Non‑Halogenated Flame Retardant Behavior at common engineering Wall Thicknesses and aligning with Modern Safety requirements.

Environmental Compliance is also addressed, as NORYL™ BN31 PPE + HIPS Resin is a ROHS Compliant Material. This supports use in Products Subject to Global Environmental and Hazardous Substance Regulations and enables Integration into International Supply Chains without Compromising Performance.

Notes :

NORYL™ BN31 PPE + HIPS Resin
High Flow
Hydrolytic Stability
Non‑Halogenated Flame Retardant
ROHS Compliant

NORYL BN31 PPE + HIPS has 0.60 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 82

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

2410

NORYL™ BN31 are UL94 - V0, 1.50 mm ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.