NORYL™ BN9003G PPE + HIPS General Purpose Resin for Wide Applications

Impact Strength, Low Warpage, Dimension Stability & Surface Aesthetics

NORYL™ BN9003G PPE + HIPS Resin is a Non Reinforced Engineering Thermoplastic developed for applications that require consistent Surface Quality and Dimensional Stability in exterior environments. This General Purpose PPE + HIPS Blend is particularly well suited for Automotive Exterior Components where Visual Appearance and Structural reliability must be maintained.

Processing Capability of NORYL™ BN9003G PPE + HIPS Resin support Blow Molding applications, enabling the formation of Uniform, Hollow, or Complex Shapes with controlled material Distribution. This processing advantage allows efficient production of components where surface finish and geometry must be maintained without distortion.

NORYL™ BN9003G PPE + HIPS Resin enables Molded Parts to achieve Clean, Consistent Visual Appearance, making the Grade suitable for exterior components where finish quality is a visible requirement. The Non Reinforced Structure contributes to smoother surface replication compared to filled systems.

Mechanical behavior of NORYL™ BN9003G PPE + HIPS Resin provides Impact Resistance that support durability during Handling, Assembly, and in service use. This toughness helps maintain component Integrity in applications exposed to external forces and environmental conditions.

NORYL™ BN9003G PPE + HIPS Resin offers Part Accuracy and alignment over time, especially in larger or exterior components. These properties help retain shape consistency despite environmental exposure and processing variation.

Environmental and Regulatory alignment is achieved through the ROHS compliant status of NORYL™ BN9003G PPE + HIPS Resin, enabling use in automotive and general purpose applications worldwide.

Notes :

NORYL™ BN9003G PPE + HIPS Resin
Blow Molding Applications
Best for Automotive Exterior Components
ROHS Compliant

NORYL BN9003G PPE + HIPS has 0.55 ~ 0.75 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 108

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 127

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/5.0 kgf = 10

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 12

Material Flexural Modulus

2190

NORYL™ BN9003G are Non UL Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.