NORYL™ CN1134 PPE + HIPS Blend with 20% Reinforced. High Modulus

Non Brominated, Non Chlorinated FR, Low Warpage & Surface Aesthetics

NORYL™ CN1134 PPE + HIPS Resin is a Reinforced, High Modulus engineering Thermoplastic designed for applications that demand Structural Rigidity, Dimensional Control, and Integrated Flame Retardant Performance. This Grade utilizes a Non Halogenated PPE + HIPS Resin System enhanced with 15% Glass Fiber and 5% Mineral ( MICA) Reinforcement to deliver Elevated Stiffness and reduced Deformation under Load.

Mechanical Performance is distinguished by the Reinforced Architecture of NORYL™ CN1134 PPE + HIPS Resin, which provides Improved Modulus, Reduced Creep, and Greater Resistance to Long Term Mechanical Stress. The Combination of Glass Fiber and Mineral Content contributes to Structural Stability while supporting consistent Part Geometry in Load Bearing or Precision Components.

Dimensional Reliability is further supported through the Low Warpage and Hydrolytic Stability characteristics of NORYL™ CN1134 PPE + HIPS Resin, making it suitable for applications exposed to Moisture or Thermal Cycling. In Parallel, Good Surface Aesthetics enable use in Finished Components where both Structural Integrity and Visual Appearance are required.

Flame Performance for NORYL™ CN1134 PPE + HIPS Resin is defined its Certified UL Rating. NORYL™ CN1134 are UL94- V1 Rated @ 1.50 mm ~ 3.00 mm , confirming Non Brominated, Non Chlorinated Flame Retardant behavior at common engineering Wall Thicknesses while aligning with Safety and Regulatory Expectations.

From an environmental perspective, NORYL™ CN1134 PPE + HIPS Resin is a ROHS Compliant material that supports Global Restrictions on Hazardous Substances. This enables Deployment in International Programs while retaining Reinforced Mechanical Performance, Flame Retardancy, and Manufacturing Consistency.

Notes :

NORYL™ CN1134 PPE + HIPS Resin
15% Glass Fiber and 5% Mineral ( MICA) Reinforcement
Hydrolytic Stability
Non‑Halogenated Flame Retardant
ROHS Compliant

NORYL CN1134 PPE + HIPS has 0.25 ~ 0.35 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 106

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/2.16 kgf = 22.1

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

5880

NORYL™ CN1134 are UL94 - V1, 1.50 mm ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.