NORYL™ FE1630PW Reinforced FDA Hydrolytic Stability PPE + ccPS Blend

Good Impact, Low Moisture Absorption & Long Term Hydrolytic Stability

NORYL™ FE1630PW PPE+ccPS Resin is a 30% Glass Reinforced Polyphenylene Ether (PPE) and Syndiotactic Polystyrene (ccPS) Blend engineered for applications requiring maximum Stiffness, Hydrolytic Stability, and Dimensional Stability. Designed for demanding Water-related environments, this grade provides superior structural performance where long-term exposure and mechanical loading are critical.

Materials used in Water Contact Applications must maintain Consistent Properties under prolonged Moisture Exposure and continuous service conditions. This grade is formulated with Low Creep Sensitivity and strong Long-Term Hydrolytic Stability, ensuring Reliable Performance without structural degradation, supporting Extended Service Life in Harsh Wet Environments.

NORYL™ FE1630PW PPE+ccPS Resin delivers the highest level of Rigidity and Load-Bearing Capability within this series due to its 30% glass reinforcement. This enables components to maintain precise geometry under stress, making it suitable for applications requiring Maximum Structural Stability and resistance to mechanical deformation.

Processing is optimized to control shrinkage and improve Low Warpage Behavior, allowing consistent part shape and dimensional accuracy. Despite its high reinforcement level, the formulation supports stable molding conditions, helping manufacturers achieve Manufacturing Consistency and reliable production outcomes.

NORYL™ FE1630PW PPE+ccPS Resin achieves UL94 HB Rating from 1.50 mm to 3.00 mm Thickness, supporting general-purpose flame performance requirements. It also demonstrates excellent resistance to moisture-related degradation, ensuring durability in continuous water exposure conditions. In addition, NORYL™ FE1630PW is RoHS Compliant, aligning with Global Environmental Standards.

From an application perspective, this material is ideal for Water System Components, Industrial Fluid Handling Equipment, and Structural Housings where high strength and long-term stability are essential. Its enhanced reinforcement level supports use in parts subjected to pressure, load, and environmental stress.

NORYL™ FE1630PW PPE+ccPS Resin ultimately delivers a high-performance solution combining Hydrolytic Stability, Maximum Rigidity, and Dimensional Control. With its highest reinforcement level, low warpage characteristics, and regulatory compliance, it provides a dependable option for Long-Term Performance in Critical Water Applications.

Notes:

NORYL™ FE1520PW PPE + CcPS Resin
20% Glass Fiber Reinforced PPE + Syndiotactic Polystyrene Blend
High Hydrolytic Stability for Water-Related Applications
Increased Stiffness, Strength, and Load-Bearing Capability
Low Warpage with Excellent Dimensional Stability
RoHS Compliant

NORYL FE1630PW PPE + ccPS has 0.1 ~ 0.3 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 145

Vicat Softening Temperature Rate

Vicat Softening Temperature rate, B120 = 158

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/5.0 kgf = 89

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/10.0 kgf = 30

Material Flexural Modulus

8120

NORYL™ FE1630PW are UL94 - HB, 1.50 ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.