NORYL™ GFN20 20% Glass Reinforced Resin Outdoor PPE + PS Unique Blend

Weatherable General Purpose Resin Applications. Hydrolytic Stability

NORYL™ GFN20 PPE + PS Resin is an Outdoor Grade, Glass Reinforced engineering Thermoplastic developed for General Purpose applications that require Long Term Environmental Stability and Dimensional Control. Formulated as a PPE + PS Resin System with 20% Glass Reinforcement, this Grade is intended for Outdoor Components where Structural Consistency and Resistance to Environmental Exposure are required.

Mechanical Performance of NORYL™ GFN20 PPE + PS Resin is defined by its reinforced Structure, which increases Stiffness while maintaining a practical Balance of Strength and Impact Resistance. Low Warpage Characteristics support Dimensional Accuracy in Molded Parts, helping Components retain Shape and Fit during extended Outdoor Service.

Resistance to Moisture related degradation is a Key Attribute of NORYL™ GFN20 PPE + PS Resin, supported by its Hydrolytic Stability under Humid and Weather Exposed conditions. This Property Contributes to reliable performance in Outdoor applications where Moisture Exposure and Environmental Cycling can Affect Long Term material Behavior.

Material Efficiency is further supported by the Low Specific Gravity of NORYL™ GFN20 PPE + PS Resin, allowing Designers to Balance Structural Performance with Weight Considerations. This Combination supports the Design of Outdoor Components that require Mechanical Reliability without excess Mass or Over Engineering.

Fire Performance Characteristics of NORYL™ GFN20 PPE + PS Resin are aligned with applications that specify Baseline Flame Behavior without reliance on formulated Flame Retardant Systems. NORYL™ GFN20 are UL94-HB rated @ 1.5 mm ~ 3.00 mm, supporting use where material selection prioritizes dtructural Stability and Outdoor Durability while meeting Standard Flammability requirements.

Regulatory Suitability over the Product Lifecycle is supported by the ROHS Compliant Status of NORYL™ GFN20 PPE + PS Resin. This enables use in Outdoor Components Destined for Global Markets where Environmental Compliance, Long Term Exposure Performance, and material Transparency are required as Part of Product Qualification and Approval Processes.

Notes :

NORYL™ GFN20 PPE + HIPS Resin
20% Glass Fiber Reinforced
Outdoor Applications
Hydrolytic Stability
ROHS Compliant

NORYL GFN20 PPE + HIPS has 0.2 ~ 0.4 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 135

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/10.0 kgf = 15

Material Flexural Modulus

4500

NORYL™ GFN20 are UL94 - HB, 1.5 mm ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.