NORYL™ GFN3 Outdoor 30% Glass Fiber Reinforced PPE + PS Unique Blend

General Purpose Resin for Outdoor Applications. Hydrolytic Stability

NORYL™ GFN3 PPE + PS Resin is a Glass‑Fiber‑Reinforced engineering Thermoplastic intended for Outdoor General Purpose use where structural support and Environmental Resistance are required. Produced as a PPE + PS Resin System with 30% Glass Fiber Reinforcement, this Grade is oriented toward designs that must retain Mechanical Integrity under Prolonged Outdoor Exposure.

Reinforcement Content defines the Core behaviour of NORYL™ GFN3 PPE + PS Resin, providing increased Stiffness and Improved Resistance to Long Term Deformation. This Structural characteristic supports Dimensional Stability in Molded Components subjected to Mechanical Load, Environmental Stress, or Installation‑Related Forces.

Environmental Durability is strengthened by the Hydrolytic Stability Exhibited by NORYL™ GFN3 PPE + PS Resin, limiting Property change when exposed to moisture or Damp Conditions. This Stability is particularly relevant for Outdoor applications where Water Exposure and Humidity Fluctuation are Part of the Normal Service Environment.

Dimensional Control and Part Consistency are further supported by the Low Warpage behavior associated with NORYL™ GFN3 PPE + PS Resin. In combination with its Low Specific Gravity, the material enables Practical Design Solutions that Balance Structural Performance with Weight Efficiency across General Outdoor Applications.

Flammability Performance of NORYL™ GFN3 PPE + PS Resin falls within Standard engineering requirements for Non Flame Retardant outdoor Materials. NORYL™ GFN3 are UL94 ‑ HB, 1.5 mm ~ 3.00 mm Rated, Indicating suitability for use in applications where baseline Flame Classification is required without additional Flame Retardant Formulation.

Environmental Conformance is addressed through the ROHS Compliant Status of NORYL™ GFN3 PPE + PS Resin, supporting use in products Intended for Global Distribution. This compliance completes the material Profile by aligning Structural Performance and Outdoor Stability with Current Environmental Regulation Expectations.

Notes :

NORYL™ GFN3 PPE + HIPS Resin
30% Glass Fiber Reinforced
Outdoor Applications
UL94 Rated
Hydrolytic Stability
ROHS Compliant

NORYL GFN3 PPE + HIPS has 0.1 ~ 0.3 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 145

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/10.0 kgf = 7

Material Flexural Modulus

6000

NORYL™ GFN3 are UL94 - HB, 1.5 mm ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.