NORYL™ N190 High Heat Outdoor Flame Retardant PPE + HIPS UL94 Blend

Non Brominated, Non Chlorinated FR, Low Warpage & Moisture Absorption

NORYL™ N190 PPE + HIPS Resin is a High Heat, Outdoor Flame Retardant engineering Thermoplastic developed for applications requiring Long Term Thermal Resistance and certified Flame Performance. This PPE + HIPS Resin system utilizes a Non Brominated, Non Chlorinated Flame Retardant formulation designed to meet safety requirements while preserving Mechanical reliability in Outdoor Environments.

Thermal and Mechanical Performance are central characteristics of NORYL™ N190 PPE + HIPS Resin, supporting use in applications exposed to elevated temperatures and environmental stress. High Impact Strength is maintained alongside Flame Resistance, allowing components to withstand physical loads without Sacrificing Structural Integrity.

Moisture Related Stability is addressed through the Low Moisture absorption and Hydrolytic Stability of NORYL™ N190 PPE + HIPS Resin, reducing property changes during Outdoor Exposure. These Characteristics assist in maintaining Dimensional Accuracy and appearance in conditions where Humidity, Rain, or Thermal Cycling are present.

Dimensional Control in Molded Components is enhanced by the Low Warpage behavior associated with NORYL™ N190 PPE + HIPS Resin, enabling consistent Part Geometry across Processing and End use Conditions. This stability supports Outdoor Designs where Fit, Alignment, and Long Term Performance are critical.

Certified Flame Performance of NORYL™ N190 PPE + HIPS Resin is confirmed through its UL Classification. NORYL™ N190 are UL94-V0 Rated at1.5 mm ~ 6.00 mm, demonstrating robust Flame Retardant behavior suitable for Outdoor applications requiring verified Fire Safety without Halogenated additives.

Environmental and Regulatory alignment is supported by the ROHS compliant status of NORYL™ N190 PPE + HIPS Resin, allowing use in Global Programs where Flame Retardancy, Outdoor Durability, and Environmental compliance must be achieved together.

Notes :

NORYL™ N190 PPE + HIPS Resin
Long Term High Heat
Non Halogenated FR
Ourdoor Applications
ROHS Compliant

NORYL N190 PPE + HIPS has 0.5 ~ 0.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 95

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/2.16 kgf = 8

Material Flexural Modulus

2200

NORYL™ N190 are UL94 - V0, 1.5 ~ 6.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.