NORYL™ N225X High Heat Outdoor Flame Resistant PPE + HIPS UL94 Mix.

Eco-Safe Flame Retardants, Low Warp & Minimal Water Intake

NORYL™ N225X PPE + HIPS Resin is an Outdoor Grade, Flame Retardant engineering Thermoplastic developed for applications where elevated Thermal Exposure and Environmental Durability are Primary Design Factors. This PPE + HIPS Resin System employs a Non Brominated, Non Chlorinated Flame Retardant formulation to deliver certified Fire Performance while maintaining Mechanical Stability in Exterior use conditions.

Environmental Resistance is a defining attribute of NORYL™ N225X PPE + HIPS Resin, supporting consistent material behavior under prolonged exposure to Heat, Moisture, and Outdoor Weathering. Low Moisture Absorption and Hydrolytic Stability help preserve Mechanical and Dimensional properties, reducing the Risk of Degradation in Humid or Variable Climates.

Mechanical reliability of NORYL™ N225X PPE + HIPS Resin is characterized by its High Impact Strength and Structural consistency, allowing components to withstand Physical Stress without compromising Flame Safety. These Properties support use in Outdoor applications where Durability and Resistance to Mechanical Shock are required alongside Flame Retardant Performance

Dimensional Control is enhanced by the Low Warpage behavior associated with NORYL™ N225X PPE + HIPS Resin, contributing to predictable Part Geometry and Fit over extended service life. The Unique stability is particularly valuable in Outdoor Designs where Thermal Cycling and Environmental Stress can affect Long Term Alignment or Performance.

Certified Flame Performance of NORYL™ N225X PPE + HIPS Resin is demonstrated through its UL Classification. NORYL™ N225X are UL94 -V0 Rated at 1.5 mm ~ 6.00 mm, indicating suitability for Outdoor applications requiring verified Fire Resistance without the use of Halogenated Additives.

Environmental and Regulatory alignment is supported by the ROHS Compliant Status of NORYL™ N225X PPE + HIPS Resin, enabling use in Products Intended for Global Markets. this Compliance Complements the Material’s Outdoor Flame Performance, Thermal Stability, and Long Term Mechanical Reliability.

Notes :

NORYL™ N225X PPE + HIPS Resin
Outdoor Application
Non Halogenated FR
ROHS Compliant

NORYL N225X PPE + HIPS has 0.5 ~ 0.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 99

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 128

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

2490

NORYL™ N225X are UL94 - V0, 1.5 ~ 6.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.