NORYL™ N300X Resin. High Heat Outdoor UL94 Flame Retardant PPE + HIPS

Non Brominated, Non Chlorinated FR, Low Warpage & Moisture Absorption

NORYL™ N300X PPE + HIPS Resin is a High Performance Outdoor Flame Retardant engineering Thermoplastic Intended for applications where Fire Safety, Environmental Resistance, and Thermal endurance must be addressed simultaneously. The Special PPE + HIPS Resin system employs a Non Brominated, Non Chlorinated Flame Retardant formulation designed to maintain Structural Integrity in demanding Exterior Conditions.

Flame Retardant Behavior of NORYL™ N300X PPE + HIPS Resin is Integrated with Mechanical Robustness, allowing Components to Perform Reliably while Meeting Stringent Fire Safety Expectations. the material retains High Impact Strength even in elevated Temperature Environments, supporting durable Performance under both Thermal and Mechanical Stress.

Environmental Exposure Performance is strengthened through the Low Moisture Absorption and Hydrolytic Stability of NORYL™ N300X PPE + HIPS Resin, helping preserve Mechanical Properties and Surface Integrity over time. These Characteristics are sspecially important in Outdoor Installations where Humidity, Rain, and Thermal Cycling are common.

Part Geometry consistency is supported by the Low Warpage characteristics associated with NORYL™ N300X PPE + HIPS Resin, enabling reliable dimensional control across processing and service conditions. This Stability is beneficial for Outdoor Components that require Long Term alignment, Fit Accuracy, and Visual Consistency.

Fire Classification for NORYL™ N300X PPE + HIPS Resin is demonstrated by its UL Rating. NORYL™ N300X are UL94 -V0 Rated at 1.5 mm ~ 6.00 mm, confirming suitability for Outdoor applications requiring verified Flame Resistance without Halogenated Flame Retardant Additives.

Environmental Compliance considerations are addressed through the ROHS Compliant Status of NORYL™ N300X PPE + HIPS Resin, supporting use in Products Designed for Global Markets. this Compliance Complements the Material’s Flame Performance, Thermal Stability, and Resistance to Outdoor Environmental Stress.

Notes :

NORYL™ N300X PPE + HIPS Resin
Low Warpage
Non Halogenated FR
Outdoor Applications
ROHS Compliant

NORYL N300X PPE + HIPS has 0.5 ~ 0.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 140

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 162

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/5.0 kgf = 7.4

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 7

Material Flexural Modulus

2520

NORYL™ N300X are UL94 - V0, 1.5 ~ 6.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.