NORYL™ NH6010B Low Smoke Flame Retardant PPE + HIPS Unique UL94 Blend

Non Brominated, Non Chlorinated FR. High Heat & Low Specific Gravity

NORYL™ NH6010B PPE Resin is a Low Smoke, Non Halogenated Flame Retardant engineering Thermoplastic developed for applications requiring certified Fire Performance under elevated Temperature Conditions. This material is engineered to address High Heat Exposure while controlling Smoke and Toxicity, supporting Safety Critical Designs where Thermal Endurance is a Core Requirement.

High Temperature capability differentiates NORYL™ NH6010B PPE Based Resin from conventional Low Smoke Materials by maintaining Structural Integrity when subjected to elevated Service Temperatures. This Thermal Stability enables use in applications where both Flame Resistance and Heat Performance must be sustained without compromising material reliability.

Smoke Suppression and Toxicity Control are Fundamental characteristics of NORYL™ NH6010B PPE Resin, providing reduced Smoke Output during combustion Events. These Properties support improved Safety Outcomes in Fire Scenarios where Visibility, Air Quality, and controlled Decomposition behaviour are Critical Design Considerations.

Mechanical Stability of NORYL™ NH6010B PPE Resin is supported by Low Creep Sensitivity and Hydrolytic Stability, allowing components to retain Functional Geometry under Long Term Load and Environmental Exposure. The Combination of Structural Consistency and Moisture Resistance enhances Performance Reliability across demanding Operating Conditions.

Design Efficiency is improved through the Low Specific Gravity of NORYL™ NH6010B PPE Resin, enabling Fire Safe and Heat Resistant component design without excess weight penalty. This Balance is particularly valuable in applications where Thermal Performance, Mass Reduction, and Regulatory Compliance must be achieved Simultaneously.

Flame Safety Certification of NORYL™ NH6010B PPE Based Resin is established through its UL Rating. NORYL™ NH6010B are UL94-V0, 1.5 mm ~ 3.00 mm Rated, Confirming Suitability for applications that demand verified Flame Resistance combined with Low Smoke, Non Halogenated Formulations.

Environmental and Market compliance are achieved through the ROHS Compliant Status of NORYL™ NH6010B PPE Resin, supporting Global Adoption in Programs where Fire Safety, Heat Resistance, and Environmental Responsibility are required to Coexist.

Notes :

NORYL™ NH6010B PPE Resin
Low Smoke Flame Retardant
Non Halogenated FR
ROHS Compliant

NORYL NH6010B PPE + HIPS has 0.5 ~ 0.8 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 122

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 143

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/5.0 kgf = 5.6

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 5

Material Flexural Modulus

2360

NORYL™ NH6010B are UL94 - V0, 1.5 ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.