NORYL™ NH8000 ECO Flame Retardant PPE+HIPS. Electrical Performance

Non Brominated, Non Chlorinated FR, High Heat HDT Outdoor Applications

NORYL™ NH8000 PPE + HIPS Resin is a Low Flow, Non Halogenated Flame Retardant engineering Thermoplastic developed to address Electrical Performance and High‑Temperature requirements in both Indoor and Outdoor Applications. This ECO Positioned PPE + HIPS Resin system is Designed to deliver Certified Flame Safety while supporting Dimensional and Environmental Stability without Brominated or Chlorinated additives.

Electrical Integrity is a Primary functional attribute of NORYL™ NH8000 PPE + HIPS Resin, supporting use in applications where insulation performance and consistent Electrical properties are essential. The Low Flow characteristics are intended for controlled Mold Filling in Thick Wall or Structurally Demanding components where Processing Stability and Property Retention are required.

Thermal Endurance in Elevated Temperature Environments is supported by the High Heat Deflection capability of NORYL™ NH8000 PPE + HIPS Resin, making it suitable for applications Exposed to sustained Heat Loads. This Thermal Stability enables reliable performance across a Range of Service conditions without compromising Mechanical or Electrical Behaviour.

Environmental Performance of NORYL™ NH8000 PPE + HIPS Resin is enhanced through its Hydrolytic and Dimensional Stability, limiting property change under Moisture Exposure and Thermal Cycling. These Characteristics support Long Term use in applications Installed in variable Indoor or Outdoor Environments where consistent Geometry and Functional Reliability are required.

Fire Safety characteristics of NORYL™ NH8000 PPE + HIPS Resin are defined by its Non‑Brominated, Non‑Chlorinated Flame Retardant formulation and verified UL Classification. NORYL™ NH8000 are UL94 ‑ V0, 1.50 mm ~ 6.00 mm Rated, confirming suitability for applications that demand robust Flame Resistance across a Broad Wall Thickness range.

Environmental and Regulatory alignment is addressed through the ROHS Compliant Status of NORYL™ NH8000 PPE + HIPS Resin, supporting adoption in Global Programs where Electrical Performance, Heat Resistance, and Flame Safety must be balanced with Environmental Responsibility.

Notes :

NORYL™ NH8000 PPE + HIPS Resin
Long Term High Heat
Non Halogenated FR
Ourdoor Applications
ROHS Compliant

NORYL NH8000 PPE + HIPS has no data for Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 146

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 164

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/5.0 kgf = 3.8

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 3.6

Material Flexural Modulus

2460

NORYL™ NH8000 are UL94 - V0, 1.50 ~ 6.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.