NORYL™ NH6100 Low Smoke EN45545 R22 Flame Retardant PPE + HIPS Blend

Low Smoke & High Heat Performance. Rail Electrical Applications

NORYL™ NP6100 PPE + HIPS Resin is a Low Smoke engineering thermoplastic developed to meet EN45545 R22 Fire Safety requirements for Transport and Safety Critical applications. This PPE based Resin System is formulated with a Non Brominated, Non Chlorinated Flame Retardant Technology to address stringent Smoke and Heat Performance Expectations without relying on Halogenated Additives.

Fire Behaviour characteristics of NORYL™ NP6100 PPE + HIPS Resin emphasize reduced Smoke Emission and controlled Toxicity during combustion events. These Properties support passenger Safety and Visibility requirements in enclosed or High Occupancy Environments where Smoke Management is a Primary Design Criterion.

Thermal Capability Plays an important role in the performance profile of NORYL™ NP6100 PPE + HIPS Resin, enabling reliable use under elevated temperature conditions. High Heat Resistance is maintained alongside Flame Retardant performance, supporting Structural Stability in applications exposed to sustained Thermal Loads.

Long Term Mechanical reliability of NORYL™ NP6100 PPE + HIPS Resin is supported by its Low Creep Sensitivity and Hydrolytic Stability. These characteristics help maintain Geometry and Functional integrity in components subjected to continuous Load, Moisture Exposure, or Environmental Cycling over extended Service Life.

Certification to EN45545 R22 confirms the Fire Safety suitability of NORYL™ NP6100 PPE + HIPS Resin for Rail and Transport related applications where verified Low Smoke and Flame Retardant performance are mandatory.

Environmental and Regulatory alignment is addressed through the ROHS Compliant Status of NORYL™ NP6100 PPE + HIPS Resin, supporting adoption in Global Programs. This Compliance completes the material Profile by aligning Fire Safety Certification, Mechanical Stability, and Environmental Responsibility within a Single engineering Solution.

Notes :

NORYL™ NP6100 PPE + HIPS Resin
Low Smoke EN45545 R22
Rail Applications
ROHS Compliant

NORYL NP6100 PPE + HIPS has 0.5 ~ 0.7 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 121

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 151

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/10.0 kgf = 10.5

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 11

Material Flexural Modulus

2350

NORYL™ NP6100 are Non UL Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.