NORYL™ PX2630F High Impact PPE + HIPS FDA Food Contact Compliant Resin

Good Low Moisture Absorption, Dimension Stability & Hydrolytic Stable

For applications where Durability must meet Regulatory Safety, NORYL™ PX2630F Resin provides a reliable Solution. This Non Reinforced Engineering material combines Polyphenylene Ether (PPE) with High Impact Polystyrene (HIPS), forming a balanced System designed for long term performance in controlled Environments.

A key advantage of NORYL™ PX2630F Resin Lies in its FDA Food Contact Compliance, making it suitable for components that may come into Direct or Indirect Contact with Consumables. This adds confidence when selecting Materials for Appliances and Regulated applications.

Moisture has minimal effect on performance. NORYL™ PX2630F Resin exhibits Low Moisture Absorption, allowing Molded Parts to maintain Dimensional accuracy even in Humid Conditions. Fits remain Stable. Warpage is reduced.

The material also demonstrates Strong Hydrolytic Stability. Exposure to Water does not easily Degrade its Structure, which support reliable performance over Time. This is especially useful in Environments where Temperature and Humidity Fluctuate.

Impact Resistance further enhances Durability. NORYL™ PX2630F Resin Absorbs Mechanical Stress without Cracking Easily, allowing components to withstand Routine Handling and Service Conditions.

Processing remains Efficient. The material Flows Consistently during Molding, enabling uniform Part Formation with Predictable Results across Production Cycles.

Typical applications include Food Contact Components, Appliance Housings, Water Related Systems, and durable Consumer Parts, where Compliance, Impact Resistance, and Dimensional Stability must Work Together.

Selecting NORYL™ PX2630F Resin also reflects a Responsible Approach to material Use. Its ROHS Compliant formulation support Environmentally Conscious Design while maintaining reliable Engineering Performance.

Notes :

NORYL™ PX2630F PPE + HIPS Resin
Food Contact Compliant
Low Moisture Absorption
Hydrolytic Stability
RoHS Compliant

NORYL PX2630F PPE + HIPS has no data for Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

6.4 mm, unannealed 126

Vicat Softening Temperature Rate

N/A

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/10.0 kgf = 3.8

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

2090

NORYL™ PX2630F are Non UL Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.