NORYL™ PX5373 Outdoor Grade Reinforced UL94 Rated FR PPE + PS Blend

Non Brominated, Non Chlorinated FR. Dimensional Stability & High Heat

NORYL™ PX5373 PPE + PS Resin is an Outdoor Grade, Glass Reinforced Flame Retardant engineering Thermoplastic developed for applications requiring stable serformance under Heat and Environmental Exposure. This Grade utilizes a PPE Based resin system Reinforced with 20% Glass Fiber and a Non Halogenated Flame Retardant formulation to support Structural Reliability in Exterior conditions.

Structural Behavior of NORYL™ PX5373 PPE + PS Resin is defined by its Reinforced Composition, which enhances Stiffness and Helps maintain Dimensional control in Outdoor applications subjected to Mechanical and Thermal Stress. This Reinforced Architecture supports consistent Part Geometry without Excessive Weight increase.

Thermal Performance is a central attribute of NORYL™ PX5373 PPE + PS Resin, enabling reliable use in Outdoor Installations where elevated Temperatures and Weather Related Exposure are common. Dimensional Stability is preserved through Low Warpage Characteristics, helping Components Retain Fit and alignment over Extended Service Life.

Design Efficiency is further supported by the Low Specific Gravity of NORYL™ PX5373 PPE + PS Resin, allowing Structural and Flame Retardant requirements to be met without compromising Weight Targets. This Balance is particularly valuable in Outdoor Designs where Durability and material Efficiency must be managed together.

Flame Safety Classification for NORYL™ PX5373 PPE + PS Resin is established through its Verified UL Performance. NORYL™ PX5373 are UL94 -V1, 1.50 mm ~ 3.00 mm Rated, confirming suitability for Outdoor applications that require Certified Flame Resistance using Non Brominated, Non Chlorinated Systems.

Environmental and Regulatory alignment is achieved through the ROHS Compliant Status of NORYL™ PX5373 PPE + PS Resin, supporting use in Global Markets. This Compliance Complements the Material’s Outdoor Stability, Flame Performance, and Reinforced Structural Characteristics.

Notes :

NORYL™ PX5373 PPE + PS Resin
20% Glass Fiber Reinforced
Non Halogenated UL94 Rating
ROHS Compliant

NORYL PX5373 PPE + HIPS has 0.2 ~ 0.4 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 140

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/10.0 kgf = 12

Material Flexural Modulus

4500

NORYL™ PX5373 are UL94 - V1, 1.50 ~ 3.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.