BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
NORYL™ V0150B Outdoor Low Temperature Impact PPE + HIPS Unique Blend
Non Brominated, Non Chlorinated FR. Hydrolytic Stability & High Heat
NORYL™ V0150B PPE + HIPS Resin is an Outdoor Focused, Non Halogenated Flame‑Retardant engineering Thermoplastic developed for applications that must perform reliably under both Thermal and Environmental stress. This Grade is formulated using a PPE + HIPS Resin system designed to combine certified Flame Resistance with Mechanical Toughness required for exterior use.
Impact Performance at reduced Temperatures is a defining characteristic of NORYL™ V0150B PPE + HIPS Resin, supporting component durability in Outdoor Conditions where Low Temperature exposure can affect conventional Materials. This Reinforced Toughness enhances resistance to Mechanical Shock during Installation and Service.
Thermal Capability of NORYL™ V0150B PPE + HIPS Resin supports stable performance in applications subjected to elevated Temperatures while maintaining Flame‑Retardant function. High Heat Resistance Works in Parallel with Dimensional Control to Preserve Structural Integrity across changing Environmental conditions.
Environmental Stability is strengthened through the Hydrolytic Stability and Low Moisture Absorption of NORYL™ V0150B PPE + HIPS Resin, limiting property degradation caused by Humidity, Rain, or Moisture Cycling. These Characteristics contribute to Long Term reliability in Outdoor applications where Environmental Exposure is continuous.
The UL Classification verifies the Fire Safety Performance of NORYL™ V0150B PPE + HIPS Resin. Rated UL94-V0 at 1.00mm to 3.00mm, NORYL™ V0150B offers robust Flame Resistance via a Halogen Free formulation, meeting Demanding Outdoor Safety standards
Regulatory and Environmental alignment is achieved through the ROHS Compliant Status of NORYL™ V0150B PPE + HIPS Resin, supporting use in Global applications where Flame Safety, Low‑Temperature Durability, and Environmental Responsibility must be achieved Simultaneously.
Notes :
NORYL™ V0150B PPE + HIPS Resin
Outdoor Perfromance
Low Temperature Impact
Non Halogenated UL94 Rating
ROHS Compliant
NORYL V0150B PPE + HIPS has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 135
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 155
Material MFI / Melt Flow Rate
Melt Flow Rate, 280°C/5.0 kgf = 3.5
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/5.0 kgf = 10.0
Material Flexural Modulus
2400
NORYL™ V0150B are UL94 - V0, 1.00 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.