top of page

LEXAN™ DLCW Sheet. Indoor Diffusion White Polycarbonate Sign Sheet

LEXAN Polycarbonate Sheet

High Light Transmission + High Hiding Power to Eliminate LED Hotspots

New LEXAN™ DLCW Polycarbonate Sheet Diffusing Sheet is Low Gloss Translucent Sheet with Unique Light Diffusing Properties Designed for Indoor LED and Conventional Lighting Fixtures.

Inherent Toughness, Cold Bending Capability, Wide Service Temperature, High Light Transmission (% LT) Coupled with Hiding Power (DLD) make this LEXAN™ DLCW an Ideal Candidate for Variety of Indoor Applications

It Has Diffused Light Cool White Advantage for Design Freedom such as Sign, Skylights, Privacy Partitions or Windows. This Grade is UL 94 Rated Polycarbonate Sheet

POLYVANTIS LEXAN™ DLCW Polycarbonate Sheet has Unique Surface Texture with State of the Art Diffuser Technology Ensures Light which Projected Uniformly across the Lens and Provides Hiding Power for LED Hot Spots while Maintaining Light Transmission as High as 85 %

Available in
Standard Color : Cool White - 1G9A3862X
Standard Color : Cool White - 1G9A3863X
Standard Color : Cool White - 1G9A3864X

*Degree of light dispersion (DLD): angle at which half of the luminance of the incident light is observed. Higher DLD, better hiding power. Typical values listed.

LEXAN™ DLCW Sheet Standard Available Thickness

LEXAN™ DLCW Sheet @ 1.02 mm
LEXAN™ DLCW Sheet @ 1.50 mm
LEXAN™ DLCW Sheet @ 3.00 mm
LEXAN™ DLCW Sheet @ 3.20 mm

Unique Surface Appearance of LEXAN™ DLCW Polycarbonate Sheet

LEXAN DLCW Sheet has a Matte Top Surface & Polish Bottom Surface

Features & Benefits of Advance LEXAN™ DLCW Polycarbonate Sheet

Cool White
Diffusion White
High Hiding Power
Printable
High Impact Strength
Dimensional Stability
Lightweight
Formable

LEXAN™ DLCW Opal White Diffusion PC Sheet | Wah Lee Group
LEXAN™ DLCW Opal White Diffusion PC Sheet | Wah Lee Group
LEXAN™ DLCW Opal White Diffusion PC Sheet | Wah Lee Group

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page