top of page

LEXAN™ EXELL D Sheet. Outdoor, UV Resistance Coated Polycarbonate

LEXAN Polycarbonate Sheet

Virtually Unbreakable, Transparent for Overhead or Vertical Glazing

LEXAN™ EXELL D Polycarbonate Sheet offers 10 Year Limited Warranty against Breakage, Yellowing, and Loss of Light Transmission
It has 2 Side UV Resistant Coating for Long Lasting Applications such as Awning, Skylight, Glazing etc
The Material Blocks 99.9% UV-Ray Below 400 nm Range

Tested and Passed against various Norms like DIN4102 and ABG.

LEXAN™ EXELL D Sheet passed the Below Regulations

- BS 476 Part 7 Method of Test to Determine the Classification of the Surface Spread of Flame of Products - Class 1Y

- EN13501-1 Fire Test to Building Material - B, s1, d0

- EN15725-1 Extended Application Reports on the Fire Performance of Construction Products and Building Elements

- EN ISO 11925-2 Reaction to Fire Tests — Single-flame Source Test

- NFPA 130 - Standard for Fixed Guideway Transit and Passenger Rail Systems, provides Fire Protection and Life-safety Requirements for Underground, Surface and Elevated Fixed Guideway Transit and Passenger Rail Systems

- ISO 6000 CENT/TS 16516 VOC Emission Testing - A+/E1

- ANSI/NFPA Minimum Building Design, Construction, Operation, and Maintenance Requirements Necessary to Protect Building Occupants from Danger caused by Fire, Smoke, and Toxic Fumes - Class A

- ECE R43 Glazing Approved

Available in
Standard Color : Clear - 112
Standard Color : Bronze - 5109
Standard Color : Opal White - WH4D348O
Custom Color : Opal White - WH7D2870 ( 50% Light Transmission )
Custom Color : Opal White - WH8284X ( 25% Light Transmission )
Custom Color : Green 315063
Custom Color : Grey 713
Custom Color : Grey GY7A102T
Custom Color : Blue 215009

LEXAN™ EXELL D Sheet Standard Available Thickness

LEXAN™ EXELL D Sheet @ 2.00 mm
LEXAN™ EXELL D Sheet @ 3.00 mm
LEXAN™ EXELL D Sheet @ 4.00 mm
LEXAN™ EXELL D Sheet @ 5.00 mm
LEXAN™ EXELL D Sheet @ 6.00 mm
LEXAN™ EXELL D Sheet @ 8.00 mm
LEXAN™ EXELL D Sheet @ 9.50 mm
LEXAN™ EXELL D Sheet @ 12.00 mm
LEXAN™ EXELL D Sheet @ 15.00 mm

Unique Surface Appearance of LEXAN™ EXELL D Polycarbonate Sheet

LEXAN EXELL D Sheet has a Polish Top Surface & Polish Bottom Surface

Features & Benefits of Advance LEXAN™ EXELL D Polycarbonate Sheet

High Gloss Surface
Printable
High Impact Strength
Inherent “Crystal Clear” Transparency
Dimensional Stability
Lightweight
Formable

LEXAN™ EXELL D Outdoor Polycarbonate Sheet | Wah Lee Group
LEXAN™ EXELL D Outdoor Polycarbonate Sheet | Wah Lee Group
LEXAN™ EXELL D Outdoor Polycarbonate Sheet | Wah Lee Group

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page