top of page

LEXAN™ H6506 Sheet. High Stiffness Low Gloss Opaque PC/ABS for Rail

LEXAN Polycarbonate Sheet

Lightweight for Railway Side
Walls, Ceiling, Tables and Seating

LEXAN™ H6506 Polycarbonate Sheet is a Suede Texture Opaque, Solid, Low-Gloss PC/ABS Blend

The Material can be Thermoformed at a Lower Temperature than Traditional PC Materials. Its Molded-in color Capability Avoids the Cost and Environmental Hazards of Secondary Painting with Excellent Aesthetics.

LEXAN™ H6506 is Bromine & Chlorine Free Flame Retardant Formulated

Compliance with
- German DIN 5510-2:2009
- French NF16101: M1 F1 Norm at 2.0 mm - 4.0 mm
- European EN45545 Norm at HL2 for R1 ( Interior Wall & Ceiling Components) & R6 (Seating) @ 3.0 mm - 4.0 mm
- Russian Rail Norm GOST 12.1.044-89
- Polish Rail norm PN-K-02511 & UIC564-2, Annex 7-11-15 P1(A)-R1-D2(B)-T2 @ 4.0 mm Pass for Wall & Ceiling
- US Railway Regulations, Meeting the Stringent Fire, Smoke Density and Smoke Toxicity Requirements:
- NFPA 130 - Fixed Guideway Transit and Passenger Rail Systems
- ASTM E162 - Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E662 - Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E1354 - Heat and Visible Smoke Release Rates for Materials And Products Using an Oxygen Consumption Calorimeter
- SMP 800C - Toxic Gas Sampling and Analytical Procedures

LEXAN™ H6506 Sheet Standard Available Thickness

LEXAN™ H6506 Sheet @ 1.50 mm
LEXAN™ H6506 Sheet @ 2.00 mm
LEXAN™ H6506 Sheet @ 3.00 mm
LEXAN™ H6506 Sheet @ 4.00 mm
LEXAN™ H6506 Sheet @ 5.00 mm

Unique Surface Appearance of LEXAN™ H6506 Polycarbonate Sheet

LEXAN H6506 Sheet has a Suede Top Surface & Non Functional Fine Matte Bottom Surface

Features & Benefits of Advance LEXAN™ H6506 Polycarbonate Sheet

Non-Chlorinated and Non-brominated
Flame, Smoke, Toxicity
High Impact Strength
Lightweight
Low Temperature Formable

LEXAN™ H6506 Railway PC/ABS Opaque Sheet | Wah Lee Group
LEXAN™ H6506 Railway PC/ABS Opaque Sheet | Wah Lee Group
LEXAN™ H6506 Railway PC/ABS Opaque Sheet | Wah Lee Group

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page