top of page

LEXAN™ MARGARD™ MR5T Sheet. Flat Outdoor Hard Coat Polycarbonate

LEXAN Polycarbonate Sheet

Hard Coating Grade. Ripple Oriented with Best Chemical Resistant

Optical Quality LEXAN™ MARGARD™ MR5T Coated Sheet with Excellent Abrasion Resistance, with a 7 Years Limited Written Warranty against Yellowing, Loss of Light Transmission, Coating Delamination and a 10 Years Limited Warranty against Breakage.

It has Enhanced Chemical Resistance, Ripple Oriented and Anti-Graffiti Properties. Ideal of Use in Public Areas for High Abuse Applications.

Transportation Grade with 2 Sides Hard Coated Sheet for Flat Applications

Produced in POLYVANTIS USA Plant

Available in
Standard Color : Clear - 112
Standard Color : Bronze - 5109
Standard Color : Grey - 713

LEXAN™ MARGARD™ MR5T Sheet Standard Available Thickness

LEXAN™ Margard™ MR5T Sheet @ 5.00 mm
LEXAN™ Margard™ MR5T Sheet @ 6.00 mm
LEXAN™ Margard™ MR5T Sheet @ 8.00 mm
LEXAN™ Margard™ MR5T Sheet @ 9.50 mm
LEXAN™ Margard™ MR5T Sheet @ 12.70 mm

Unique Surface Appearance of LEXAN™ MARGARD™ MR5T Polycarbonate Sheet

LEXAN MARGARD™ MR5T Sheet has a Polish, Hard Coated Top Surface & Polish, Hard Coated Bottom Surface

Features & Benefits of Advance LEXAN™ MARGARD™ MR5T Polycarbonate Sheet

Superior Optical Quality
UL Rated
2 Side Hard Coated Outdoor
High Gloss Surface
High Impact Strength
Inherent “Crystal Clear” Transparency
Dimensional Stability
Lightweight

LEXAN™ MARGARD MR5T Hard Coated PC Sheet | Wah Lee Group
LEXAN™ MARGARD MR5T Hard Coated PC Sheet | Wah Lee Group
LEXAN™ MARGARD MR5T Hard Coated PC Sheet | Wah Lee Group

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page