ULTEM™ 1000P Unique Powder Form PEI. Average Particle Size 350 micron

Coarse Particle Control Stable handling Thermal Processing use

ULTEM™ 1000P PEI Powder is designed for applications that require Robust Particle Structure with Versatile Processing capability. as an advanced General Purpose Polyetherimide in Powder Form, it Bridges Conventional Molding with specialized Fabrication Techniques.

this ULTEM™ 1000P PEI Powder is supplied as a Spherical Particle System with an average Size of approximately 350 Microns. This Larger Particle Profile support Stable Flow during Handling while allowing controlled packing in Processing Environments where Density Distribution Matters.

the Spherical Geometry contributes to Smoother Movement during Feeding and Spreading. ULTEM™ 1000P PEI Powder behaves consistently under Gravity or Mechanical Transfer, which helps reduce Irregular Build Up in Powder Handling Systems.

ULTEM™ 1000P PEI Powder maintains a Glass Transition Temperature of around 217 °C, allowing the material to retain Strength under Elevated Temperatures. This support applications that require Heat Resistance across repeated Processing Cycles.

compared with Finer Powders, ULTEM™ 1000P PEI Powder offers a more balanced Handling Experience, Combining Process stability with Sufficient Flow Control for General applications. This makes it suitable for use in Systems where Ultra Fine Distribution is not required, but consistency still Matters.

the material retains the Characteristic Transparent Amber appearance Associated with PEI, allowing Visual Identification and Compatibility with applications where Color consistency is required.

Typical uses include Powder Processing Systems, Compression or Sintering applications, Coatings, and General Engineering components, where Particle Uniformity and Thermal Performance must Work Together.

Selecting ULTEM™ 1000P PEI Powder also reflects a Responsible material Choice. Its RoHS Compliant Composition support Environmentally Conscious Design while maintaining reliable High Temperature capability.

Notes :

ULTEM™ 1000P PEI Powder
Average size of approximately 350 Microns
Control Stable Handling
RoHS Compliant

ULTEM™ 1000P PEI Resin has Non Listed Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 190

Vicat Softening Temperature Rate

Vicat Softening Temperature rate , B50 = 211

Material MFI / Melt Flow Rate

Melt flow Rate, 337°C/6.6 kgf = 9

Material Melt Volume Rate, MVR

Melt Volume Rate, 360°C/5.0 kgf = 13

Material Flexural Modulus

3300

ULTEM™ 1000P are Non UL Rated

ULTEM Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.